Singular name: Foredom Power Tools

$45.00

SOLD AS A SET ONLY

Overall length 38”. For attachment to all Pfingst motors.

Inner Shaft Overall length 38-5/16”. With 5/16” coupling. For attachment to CH, CHP, CHM and CHG motors. Where lighter operations are required.

Share this with your friends
$20.00

Overall length 38-5/16”. With 5/16” coupling. For attachment to CH, CHP, CHM and CHG motors. Where lighter operations are required.

Share this with your friends
$4.50
Pin and chuck wrench for older model Handpieces H.44, H.44A, H.44B, H.44SJ and H.44H. Use for changing collets and accessories.
Share this with your friends
Singular name: Category:
$4.50
Pin and chuck wrench for H.43T, H.44T, H.44TSJ, H.44HT, H.35, H.35SJ, H.25, and H.25H Handpieces. Use for changing collets and accessories.
Share this with your friends
Singular name: Category:
$0.00

TXH440 KIT

PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.

Industrial Kit K.TXH440 has a Total Retail Value of $460.
Motor and Speed Control carry a 2 Year Limited Warranty.
Components:
1. Series TXH Motor:
 
This heavy duty model has exactly the same motor specifications as the M.TX. Series TX motors are Foredom’s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM.
This model comes equipped with a motor bale for hanging, and a 63″ long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom’s four square drive handpieces- the H.25H, H.30H, H.44HT and new H.28H. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones.
Foredoms permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control. Damage will result if the motor is connected to any other speed control.
 2. C.SXR Speed Control: 
The C.SXR looks the same as our standard metal foot operated control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series TX motors. This control also has a different style plug that is made to fit the motor’s shielded-type plug. The C.SXR features solid state circuitry in a cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. 6-3⁄4″ long, 4″ wide, 2-3⁄8″ high, ship wt– 6 lbs./2.7 kg.
3. H.44HT Handpiece: This special square drive, collet style handpiece is for exclusive use with our Series TXH, SRH and LXH heavy duty flex shafts. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. This handpiece is specialized and is NOT a member of the Foredom system of “interchangeable” handpieces.
4. AKHK25: This 10-pc accessory kit includes 2 aluminum oxide points, 2 CeramCut Blue stones, 1 carbide bur and 5 different mandrels fro grinding wheels and cartridge rolls. All with 1/8″ shanks.
5. Flexible shaft grease and spare motor brushes.  
 
USA RETAIL PRICE $440.00
Share this with your friends
$90.00

This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. The bottom surface of the C. SCT is covered with non-skid material. It features the same durable, solid state electronics as the C.FCT. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.SR, M.SRB, M.SRH and M.SRBH motors. CSA Listed. It is interchangeable with Foredom’s C.FCT-1 and C.EM-1 controls. 6-3/4″ long, 4″ wide, 2-3/8″ high, ship wt-6 lbs./2.7 kg.Can also be used with these discontinued motors- Series CC and DD, Series L and LB, Series F, Series PG and 1/8 Horsepower Series S, SB, SR and SRB motors.

The C.SCT-1 can also used with a Dremel 732 flex shaft tool to vary speed.

Share this with your friends
Singular name: Category: ,
$4.50
The .25 ounces of oil in this hypodermic dispenser is high grade machine oil. The dispenser has a 1″ long needle with a rubber stopper cap. To dispense, the unit must be squeezed – it is not gravity fed.
Info for Lubricating Motors:
Current Foredom motors (not the shaft and sheath but the motor itself) should NEVER be lubricated. The following older models do require routine lubrication:
Series CC, DD and MM sleeve bearing motors
Series EE, GG, and MMG motors
Series R and RB motors

 
Info for Lubricating Handpieces:
Duplex spring handpieces (H.8D, H.10D, H.15D, H.18D, H.20D, H.52D, H.55D and H.56D) all require lubrications in the duplex spring component
H.10 Quick Change handpiece requires lubrication after first 2-3 months of use
H.15 Hammer handpiece requires periodic lubrication
H.55A and H.56A Angle handpieces require periodic lubrication
Share this with your friends
Singular name: Category:
$29.95

Kit includes inner shaft, pair of motor brushes, grease

This maintenance kit is for all TX machines

Share this with your friends
Singular name: Category:
$15.00

This 39″ long inner shaft comes installed and should be used to replace broken or worn shafts on these motors: Series TX, S, SR, CC

Share this with your friends
Singular name: Category:
$114.00

Handpiece H8D

 

The H.8D has the same specs as the H.8, except includes a duplex spring for added flexibility. It is a slim collet type handpiece with pre-lubricated ball bearings that require no maintenance. It has a chuck guard that slides back when changing burs. Comes with 3/32″ (installed) and 1/8″ collets and chuck wrenches for changing collets and accessories.
Duplex springs are subject to breakage and are NOT covered by warranty. They are made of special steel, double wound tubular construction with a protective flexible spring cover. We recommend that only experienced users of flex shaft tools consider purchasing this style handpiece. For most users, the “straight” handpiece (H.8) is the preferrable solution.
9-3/8″ long, 5/8″ dia., wt. 5.2 oz.
Share this with your friends
$84.00

Handpiece H8

The H.8 is also a slim collet type handpiece with pre-lubricated ball bearings that require no additional lubrication. It has a chuck guard that slides back when changing burs. Comes with 3/32″ and 1/8″ collets and chuck wrenches for changing collets and accessories.
6-1/8″ long, 5/8″ dia., wt. 3.55 oz.
Share this with your friends
$102.00

Handpiece H50C

Foredom’s chisel handpiece gives a power assist to carving projects in all types of wood, plastic, and plaster. This handpiece has a contoured body design that features a rugged plastic barrel and tapered aluminum ends. The easy to maintain chisel handpiece is recommended for use at low speed with Series TX and LX motors and in forward rotation only with Series SR motors. Handpiece attaches to any flex shaft machine with a standard key tip shaft. The Chisel Handpiece must be used only in the forward motor direction.
Recommended Speed:
Optimum Speed Range- 3,000-10,000 rpm.
Max. Operating Speed- 18,000 rpm.
Handpiece specifications: 6″ long, 1″ in diameter, weight: 4.6 oz.
The H.50C comes with a set of  pre-sharpened steel cutters
Share this with your friends
$78.00

Handpiece H44T

The H.44T is a collet type handpiece that accepts accessories with up to 1/4″ diameter shanks. Has pre-lubricated ball bearings that require no additional lubrication. Comes with 3/32″, 1/8″ and 1/4″ collets, pin and wrench for changing collets and accessories.
5-5/8″ long, 1″ dia. (center), 3/4″ dia. (taper), wt. 5.85 oz.
 
Share this with your friends
$81.60

Handpiece 44HT

The H.44HT is a collet type square drive handpiece that accepts accessories with up to 1/4″ diameter shanks. Has positive locking mechanism (locking ring) for use with Series SRH, TXH, LXH and discontinued H motors and pre-lubricated ball bearings that do not require maintenance. Comes with 3/32″, 1/8″ and 1/4″ (installed) collets, pin and wrench for changing collets and accessories. 

6-1/4″ long, 1″ dia. (center), 3/4″ dia. (taper)
Share this with your friends
$78.00

Handpiece H43T

The H.43T is a shorter version of the H.44T and accepts accessories with up to 1/4″ diameter shanks. Has pre-lubricated ball bearings that require no additional lubrication. Comes with 3/32″, 1/8″ and 1/4″ collets, pin and wrench for changing collets and accessories.
4-1/2″ long, 1″ dia. (center), 3/4″ dia. (taper), wt. 4.9 oz.
Share this with your friends
$93.60

Handpiece H30H

The H.30H square drive handpiece has a geared 3-jaw #0 chuck with 0-5/32″ (4mm) capacity. Includes chuck key in molded handle. Has positive locking mechanism (locking ring) for use with Series SRH, TXH, LXH and discontinued H motors.
5-13/16″ long, 1″ dia. (center) 
Share this with your friends
$87.60

Handpiece H30

The H.30® general purpose handpiece has prelubricated ball bearings that do NOT require any additional lubrication. Comes with HPCK-0 Chuck Key in molded plastic handle for changing accessories. Replacement chuck keys are shown below in related products. 5-3/16″ long, 1″ dia., wt. 5.85 oz.

Various bench top tools attach to this versatile handpiece, such as the Foredom Angle Grinder Attachment, Belt Sander Attachment and Handpiece Holder.

Share this with your friends
$81.60

Handpiece H28H

The H.28H is our newest collet type square drive handpiece that accepts accessories with up to 1/8″ diameter shanks. Unlike Foredom’s other square drive handpieces, this slender model attaches for use with Series SRH, TXH, LXH and discontinued H motors without a positive locking mechanism. Has pre-lubricated ball bearings that do not require maintenance. Comes with 3/32″ (installed) and 1/8″ collets, pin and wrench for changing collets and accessories. 

5-5/8″ long, 23/32″ dia. (center), 1/2″ dia. (taper).
Share this with your friends
$78.00

Handpiece H28

The H.28 has a slender, comfortable design with tapered grip and pre-lubricated ball bearings that do not require any additional lubrication. Comes with 3/32″ and 1/8″ collets, and pin and chuck wrench for changing collets and accessories.
5-1/4″ long, 23/32″ dia. (center), 1/2″ dia. (taper), wt. 3 oz.
Share this with your friends
$46.00
The reliable C.FCT-1 is Foredom’s most popular foot operated speed control. It is made of heavy-duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.SR, M.SRB, M.SRH and M.SRBH motors. CSA Listed. It is interchangeable with Foredom’s C.SCT-1 and C.EM-1 controls.
7″ long, 4-1/2″ wide, 2-3/8″ high, ship wt-2 lbs./1 kg.Can also be used with these discontinued motors- Series CC and DD, Series L and LB, Series F, Series PG and 1/8 Horsepower Series S, SB, SR and SRB motors.The C.FCT-1 can also used with a Dremel 732 flex shaft tool to vary speed.

Share this with your friends
Singular name: Category: ,
$110.95
This table top speed control is constructed of heavy duty plastic with durable solid state electronics. It has a dial control for precise speed settings, as well as good repeatability of previous settings.
For use with 115 Volt M.SR, M.SRB, M.SRH and M.SRBH motors.
Can also be used with these discontinued motors- Series CC and DD, Series L and LB, Series F, Series PG and 1/8 Horsepower Series S, SB, SR and SRB motors. The C.EM-1 can also used with a Dremel 731 flex shaft tool to vary speed.

5″ long, 5-3/4″ wide, 2-5/8″ high, ship wt-2 lbs./1 kg.

It is interchangeable with Foredom’s C.FCT-1 and C.SCT-1 controls.
Share this with your friends
Singular name: Category: ,
$4.25
Use to remove dust or chips from between rows of Typhoon points. Overall: 5/8″ wide x 5-3/4″ long. Bristle: 3/8″ wide x 1-3/4″ long x 5/8″ high
Share this with your friends
Singular name: , Category: ,
$0.00

This is great if you want a second machine or have all the bits and just want the machine. It comes with a SR machine, Plastic foot Pedal and 44T handpiece NOTHING ELSE.

 H.44T Handpiece: 
This collet style handpiece is popular among woodcarvers as it accomodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. The H.44T is a member of the Foredom system of interchangeable handpieces.

Series SR Motor: 
Foredom’s most popular and best motor for general use. The 1/6 hp, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It offers substantially more power than any of our older universal motors – 66% more than Series CC and 33% more than Series S and old SR motors. It comes equipped with a motor bale for hanging, and our standard 39″ long key-tip inner shaft and outer sheath for connecting to any of Foredom’s 19 interchangeable handpieces.  

.FCT Speed Control:
Foredom’s most popular foot operated speed control. It has solid state electronics and comes in a heavy duty plastic housing with an extra wide design.

USA RETAIL LIST $300.00

Share this with your friends
$0.00

5400 TX Kit

PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.

Woodcarving Kit K.5400 has a Total Retail Value of $556.
Motor and Speed Control carry a 2 Year Warranty.
 
Components:
1. Series TX Motor:
 

Foredom’s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load.
It comes equipped with a motor bale for hanging, and our standard 39″ long key-tip inner shaft and outer sheath for connecting to any of Foredom’s 20+ “interchangeable” handpieces.Foredom’s permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control. Damage will result if the motor is connected to any other speed control.

2. C.SXR Speed Control: 

The C.SXR looks the same as our standard foot operated control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series TX motors. This control also has a different style plug that is made to fit the motor’s shielded-type plug. The C.SXR offers the same electronics and smooth control as the C.TXR but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. 6-3⁄4″ long, 4″ wide, 2-3⁄8″ high, ship wt– 6 lbs./2.7 kg.
3. H.44T Handpiece:  This collet style handpiece is popular among woodcarvers as it accomodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. The H.44T is a member of the Foredom system of interchangeable handpieces.
4. AKWK53 Accessory Kit: 26 pc. assortment with 3/32″, 1/8″ and 1/4″ shank accessories. It includes many unique items from Foredom- ScotchBrite Radial Bristle Discs, Purple Ceramic Sanding Bands and Discs, Typhoon Burs, V Stones, CeramCut Blue Stones, and more.
5. Fur, Feathers, and Fins: 3 disc DVD set with in-depth instruction for beginning woodcarvers as well as detailed tips for more advanced power woodcarvers who want to enhance their technique. Filmed at the Vermont studio of renowned carver, Frank Russell, Fur, Feathers, & Fins shows the many steps involved in bringing simple blocks of tupelo wood to life. In over 3 hours of video material, Frank walks you through the set up of his work space, the tools he uses, safety concerns and lots more. He covers in great detail the carving of 3 different animal projects: A Cotton Tail Rabbit, Mallard Drake Duck, and Small Mouth Bass. Frank’s congenial manner and accomplished teaching style lend to the enjoyment of learning to carve.
6. Rotating Bur Holder for all size shank accessories plus bonus small round bur holder with lid. 
7. Flexible shaft grease, spare motor brushes.

 USA RETAIL LIST PRICE $430.00

Share this with your friends
$0.00

5300 Base Kit

PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.

Bench Style Woodcarving Kit K.5300 has a Total Retail Value of $434.
Motor with Built-in Speed Control carries a 2 Year Warranty.
 
Components:
1. M.SRM Motor Description:
Here a bench style version of Foredom’s 1/6 HP Series SR motor has an integrated dial speed control built into its cast-iron base for manual speed adjustment and easy placement anywhere on the workbench.
Foredom’s 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SRM combines the most important features our customers expect–power, reversibility, reliability, and versatility– all into one motor. It comes equipped with our standard 39″ long key tip inner shaft and outer sheath for connecting to any of Foredom’s 19 interchangeable, quick disconnect handpieces.
2. Built-in Speed Control Description: 
The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit.3. H.44T Handpiece: 
This collet style handpiece is popular among woodcarvers as it accommodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. The H.44T is a member of the Foredom system of interchangeable handpieces.

4. AKWK50 Accessory Kit:
12 pc. assortment kit with Typhoon and other carving burs.
5. Fur, Feathers, and Fins:
3 disc DVD set with in-depth instruction for beginning woodcarvers as well as detailed tips for more advanced power woodcarvers who want to enhance their technique. Filmed at the Vermont studio of renowned carver, Frank Russell, Fur, Feathers, & Fins shows the many steps involved in bringing simple blocks of tupelo wood to life. In over 3 hours of video material, Frank walks you through the set up of his work space, the tools he uses, safety concerns and lots more. He covers in great detail the carving of 3 different animal projects: A Cotton Tail Rabbit, Mallard Drake Duck, and Small Mouth Bass. Frank’s congenial manner and accomplished teaching style lend to the enjoyment of learning to carve.
6. Flexible shaft grease


Motor Details:

The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads.
Advantages of Running in Reverse:
Left handed users have more control of the cutting tool
Reverse helps to keep dust and other debris flying away from right handed users
Alternating motor direction helps to extend the life of certain abrasives
Reverse helps with accomplishing symmetrical grinding and carving techniques
Reverse makes it easier to back out stuck drill bits
Alternating motor direction makes it easier and faster to polish metals

 USA RETAIL PRICE $388.00
Share this with your friends
$0.00

5240 SR Kit

PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.

Woodcarving Kit K.5240 has a Total Retail Value of $464.00
Motor and Speed Control carry a 2 Year Limited Warranty.
 
Components:
1. Series SR Motor:
 
Foredom’s most popular and best motor for general use. The 1/6 hp, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It offers substantially more power than any of our older universal motors – 66% more than Series CC and 33% more than Series S and old SR motors. It comes equipped with a motor bale for hanging, and our standard 39″ long key-tip inner shaft and outer sheath for connecting to any of Foredom’s 19 interchangeable handpieces.  
2. C.FCT Speed Control:
Foredom’s most popular foot operated speed control. It has solid state electronics and comes in a heavy duty plastic housing with an extra wide design.
3. H.44T Handpiece: 
This collet style handpiece is popular among woodcarvers as it accomodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. The H.44T is a member of the Foredom system of interchangeable handpieces.
4. AKWK53 Accessory Kit:
26 pc. assortment with 3/32″, 1/8″ and 1/4″ shank accessories. It includes many unique items from Foredom- ScotchBrite Radial Bristle Discs, Purple Ceramic Sanding Bands and Discs, Typhoon Burs, V Stones, CeramCut Blue Stones, and more.
5. Fur, Feathers, and Fins:
3 disc DVD set with in-depth instruction for beginning woodcarvers as well as detailed tips for more advanced power woodcarvers who want to enhance their technique. Filmed at the Vermont studio of renowned carver, Frank Russell, Fur, Feathers, & Fins shows the many steps involved in bringing simple blocks of tupelo wood to life. In over 3 hours of video material, Frank walks you through the set up of his work space, the tools he uses, safety concerns and lots more. He covers in great detail the carving of 3 different animal projects: A Cotton Tail Rabbit, Mallard Drake Duck, and Small Mouth Bass. Frank’s congenial manner and accomplished teaching style lend to the enjoyment of learning to carve.
6. Rotating Bur Holder for all size shank accessories
7. Flexible shaft grease
 
USA RETAIL PRICE $355.00
Share this with your friends
$0.00

5200 SR Kit

PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.

Woodcarving Kit K.5200 has a Total Retail Value of $546.
Motor and Speed Control carry a 2 Year Limited Warranty.
 
Components:
1. Series SR Motor:
 
Foredom’s most popular and best motor for general use. The 1/6 hp, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It offers substantially more power than any of our older universal motors – 66% more than Series CC and 33% more than Series S and old SR motors. It comes equipped with a motor bale for hanging, and our standard 39″ long key-tip inner shaft and outer sheath for connecting to any of Foredom’s 19 interchangeable  handpieces.  
2. C.SCT Speed Control:
Offers the same electronics and smooth control as the C.FCT but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. 6-3⁄4″ long, 4″ wide, 2-3⁄8″ high, ship wt– 6 lbs./2.7 kg.
3. H.44T Handpiece: 
This collet style handpiece is popular among woodcarvers as it accomodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. The H.44T is a member of the Foredom system of interchangeable handpieces.
4. H.28 Handpiece:
This is also a collet style handpiece that comes supplied with 3/32″ and 1/8″ collets. It has a very slender design and tapered front grip that is only 1/2″ in diameter. It can be held in a “pencil grip” fashion for very close work in hard-to-reach places. The H.28 is a member of the Foredom system of interchangeable handpieces.
5. AKWK53 Accessory Kit:
26 pc. assortment with 3/32″, 1/8″ and 1/4″ shank accessories. It includes many unique items from Foredom- ScotchBrite Radial Bristle Discs, Purple Ceramic Sanding Bands and Discs, Typhoon Burs, V Stones, CeramCut Blue Stones, and more.
6. Fur, Feathers, and Fins:
3 disc DVD set with in-depth instruction for beginning woodcarvers as well as detailed tips for more advanced power woodcarvers who want to enhance their technique. Filmed at the Vermont studio of renowned carver, Frank Russell, Fur, Feathers, & Fins shows the many steps involved in bringing simple blocks of tupelo wood to life. In over 3 hours of video material, Frank walks you through the set up of his work space, the tools he uses, safety concerns and lots more. He covers in great detail the carving of 3 different animal projects: A Cotton Tail Rabbit, Mallard Drake Duck, and Small Mouth Bass. Frank’s congenial manner and accomplished teaching style lend to the enjoyment of learning to carve.
7. Rotating Bur Holder for all size shank accessories
8. Flexible shaft grease

 USA LIST PRICE $445.00

Share this with your friends
$0.00

2″ Angle Grinder with 30 Handpiece

Foredom’s New Angle Grinder attachment is designed for use with our most popular H.30 Chuck-Style Handpiece. This quality-machined, sturdy, and compact device works with 2″ and smaller discs and 2″ wheels with 3/8″ arbor holes. We offer 100+ accessories for this versatile product that can be used to grind, sand, and polish on various types of materials including metal, wood, stone, glass, ceramics, bondo and more.
Optimum Operated Speed: 10,000 to 15,000 RPM
Maximum Speed: 18,000 RPM for short intervals
.75 to 1 Gear Reduction

Use in Forward Rotation ONLY.

Foredom’s popular H.30® Chuck Style Handpiece comes with HPCK-0 CHuck Key in molded plastic handle.

Angle Grinder comes with the following:

  1. A-2202 Flap Wheel (installed), 120 grit
  2. A-10033 Sanding Screen, 120 grit
  3. A-10042 Disc Holder Protector Pad
  4. A-4592 Imperial Microfinishing Film PSA Disc, 600 grit
  5. A-4593 Imperial Microfinishing Film PSA Disc, 400 grit
  6. A-4594 Imperial Microfinishing Film PSA Disc, 320 grit
  7. A-5632 Aluminum Oxide PSA Sanding Disc, 60 grit
  8. A-5683 Ceramic Purple PSA Sanding Disc, 80 grit
  9. A-69222 Disc Mandrel
  10. A-10041 PSA Velcro Disc (5)
  11. A-69211 Drive Pin
  12. A-69217 Face Spanner Wrench
  13. A-69218 Open-End Wrench
  14. A-69219 Hex Wrench, 3mm
  15. A-69212L Long Hub, 8mm high, 14mm long mounting screw

One-Year Warranty.
Specifications:
Length: 3-1/8″, Width: 2-1/2″ (at widest), Depth: 2-3/4″

Share this with your friends
$0.00

2″ Angle Grinder Kit (no handpiece)

Foredom’s New Angle Grinder attachment is designed for use with our most popular H.30 Chuck-Style Handpiece. This quality-machined, sturdy, and compact device works with 2″ and smaller discs and 2″ wheels with 3/8″ arbor holes. We offer 100+ accessories for this versatile product that can be used to grind, sand, and polish on various types of materials including metal, wood, stone, glass, ceramics, bondo and more.
Optimum Operated Speed: 10,000 to 15,000 RPM
Maximum Speed: 18,000 RPM for short intervals
.75 to 1 Gear Reduction

Use in Forward Rotation ONLY.

Angle Grinder comes with the following:

  1. A-2202 Flap Wheel (installed), 120 grit
  2. A-10033 Sanding Screen, 120 grit
  3. A-10042 Disc Holder Protector Pad
  4. A-4592 Imperial Microfinishing Film PSA Disc, 600 grit
  5. A-4593 Imperial Microfinishing Film PSA Disc, 400 grit
  6. A-4594 Imperial Microfinishing Film PSA Disc, 320 grit
  7. A-5632 Aluminum Oxide PSA Sanding Disc, 60 grit
  8. A-5683 Ceramic Purple PSA Sanding Disc, 80 grit
  9. A-69222 Disc Mandrel
  10. A-10041 PSA Velcro Disc (5)
  11. A-69211 Drive Pin
  12. A-69217 Face Spanner Wrench
  13. A-69218 Open-End Wrench
  14. A-69219 Hex Wrench, 3mm
  15. A-69212L Long Hub, 8mm high, 14mm long mounting screw

One-Year Warranty.
Specifications:
Length: 3-1/8″, Width: 2-1/2″ (at widest), Depth: 2-3/4″

Share this with your friends