Category: Bits

$23.00

This incredible tool sculpts & sands in one operation.

Great for compound curves in carving, modelling and DIY.

1 1/4″ diameter, 60 grit

MSW-60

Share this with your friends
Singular name: , Category: ,
$19.00

Use as a router accessory for rabets and edge grooves.

Great as a mini hole saw!

60 grit and 80 grit in stock

HTB-60, HTB-80  $19.00 EACH

Share this with your friends
Singular name: , Category: ,
$21.00

1/2″ Hollow drum, performs same sanding/smoothing function as 1/2″ sanding band but doesn’t need fitting on a rubber arbor. Additionally, this wonderfully useful tool has grit on the edge opening and will double as a hole saw. 60, 80, 120 GRIT in stock

HT2-60, HT2-80, HT2-120  $21.00 EACH

Share this with your friends
Singular name: , Category: ,
$19.00

Undercutting in low relief carvings. Countour cavities in blanks and moulds. ‘Open cut’ interior of solid forms such as aircraft nose cones and decoy eye sockets, etc.  1/4″ diameter, 1/8 Shank

#BEB-80

Share this with your friends
Singular name: , Category: ,
$19.00

Use to smooth irregular surfaces, fit drawers, door & window frames, cabinet shelving, etc. 7/16″ Diameter, 1/8 Shank, 80 Grit

Share this with your friends
Singular name: , Category: ,
$26.00

Large Rounded Tip:
1/4″dia. x 2-1/4″long.
Dimple, carve, mould and grind using this rounded tip and the long, gritted, cylidrical sides. Cut channels & slots in wood, fiberglass, wallboard, compound materials, etc.

Share this with your friends
Category:
$26.00

Large Flathead Tip:
1/4″dia. x 2-1/4″long.
Use gritted tip to cut holes, slots & irregular shapes in wood, wallboard, wall tile, etc. Use side of cylinder to shape, bevel and grind

 

Share this with your friends
Category:
$26.00

Large Conical Tip:
1/4″dia. x 2-1/4″ long.
Cut holes, slots & irregular shapes in wood, wallboard, wall tile, etc. Countersink screw holes. Start and enlarge holes.

 

Share this with your friends
Category:
$116.00

The 7 piece fine detail carbide carving rotary tool set includes:

  1. PIAT Flame Burr (SR-PIA)
    1/4” (6mm) diameter
  2. Grain of Wheat (SR-GOW)
    1/8″ (3mm) diameter
  3. Inverted Cone (SR-IVC)
    1/8″ (3mm) diameter
  4. Sphere (SR-SP6)
    1/16″ (1.6mm) diameter
  5. Cutting Wheel (SR-CW6)
    3/16″  (4.8mm) diameter
  6. Straight Burr (SR-SB6)
    1/16″ (1.6mm) diameter
  7. Cutting Wheel (SR-CW3)
    3/8″ (9mm) diameter
Share this with your friends
Category: ,