Category: Dura-Grit

PBS comes in 80, 120 and 240 grit

Long lasting carbide grit. Virtually the same grit grade every time you use it!

Spend less time changing worn discs, more time sanding

Easy on the Landfill. A ‘GREEN’ alternative to using sandpaper.

Comes in 120,150  Grit        $45.00 Each  (buy 2 or more $30.00 each)

Heavy Duty Hook & Loop Conversion Kit for DuraDisc™

NEW! Specifically designed to secure your heavy duty 5″ carbide DuraDisc to most existing 5 or 8 hole orbit sanders. Also works with your regular disposable loop back discs.

Compatible with Bosch, DeWalt, Ryobi, Porter Cable, Ridgid and more…

This Hook & Loop Conversion Kit is included FREE with every DuraDisc purchase! 

Carbide Sanding Files

1/4″ Round File:
Open cut holes & irregular shapes in wall tiles for fitting pipes and trim

120 Grit

This incredible tool sculpts & sands in one operation.

Great for compound curves in carving, modelling and DIY.

1 1/4″ diameter, 60 grit

MSW-60

Use as a router accessory for rabets and edge grooves.

Great as a mini hole saw!

60 grit and 80 grit in stock

HTB-60, HTB-80  $19.00 EACH

1/2″ Hollow drum, performs same sanding/smoothing function as 1/2″ sanding band but doesn’t need fitting on a rubber arbor. Additionally, this wonderfully useful tool has grit on the edge opening and will double as a hole saw. 60, 80, 120 GRIT in stock

HT2-60, HT2-80, HT2-120  $21.00 EACH

3/8″ Diameter With 1/8″ Shank

Undercutting in low relief carvings. Countour cavities in blanks and moulds. ‘Open cut’ interior of solid forms such as aircraft nose cones and decoy eye sockets, etc.  1/4″ diameter, 1/8 Shank

#BEB-80

Use to smooth irregular surfaces, fit drawers, door & window frames, cabinet shelving, etc. 7/16″ Diameter, 1/8 Shank, 80 Grit

Large Rounded Tip:
1/4″dia. x 2-1/4″long.
Dimple, carve, mould and grind using this rounded tip and the long, gritted, cylidrical sides. Cut channels & slots in wood, fiberglass, wallboard, compound materials, etc.

Large Conical Tip:
1/4″dia. x 2-1/4″ long.
Cut holes, slots & irregular shapes in wood, wallboard, wall tile, etc. Countersink screw holes. Start and enlarge holes.

The 7 piece fine detail carbide carving rotary tool set includes:

1. PIAT Flame Burr (SR-PIA)
   1/4” (6mm) diameter
2. Grain of Wheat (SR-GOW)
   1/8″ (3mm) diameter
3. Inverted Cone (SR-IVC)
   1/8″ (3mm) diameter
4. Sphere (SR-SP6)
   1/16″ (1.6mm) diameter
5. Cutting Wheel (SR-CW6)
   3/16″  (4.8mm) diameter
6. Straight Burr (SR-SB6)
   1/16″ (1.6mm) diameter
7. Cutting Wheel (SR-CW3)
   3/8″ (9mm) diameter