The HP600 Collet Set is for use with H.8, H.8SJ, H.28 and H.28SJ collet-style handpieces. Also for Collet Adapter Attachment A-69224. This set adds great versatility since it accommodates different diameter shank burs and other accessories. The set includes these four fractional and metric sizes:
Collet HP602 1/16″
Collet HP603 3/32″
Collet HP604 1/8″
Collet HP601 1/32″
Individual collets can be purchased separately. $10.95 each
TXH440 KIT
| PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.
Industrial Kit K.TXH440 has a Total Retail Value of $460.
Motor and Speed Control carry a 2 Year Limited Warranty.
Components:
1. Series TXH Motor: This heavy duty model has exactly the same motor specifications as the M.TX. Series TX motors are Foredom’s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM.
This model comes equipped with a motor bale for hanging, and a 63″ long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom’s four square drive handpieces- the H.25H, H.30H, H.44HT and new H.28H. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones.
Foredoms permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control. Damage will result if the motor is connected to any other speed control.
2. C.SXR Speed Control:
The C.SXR looks the same as our standard metal foot operated control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series TX motors. This control also has a different style plug that is made to fit the motor’s shielded-type plug. The C.SXR features solid state circuitry in a cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. 6-3⁄4″ long, 4″ wide, 2-3⁄8″ high, ship wt– 6 lbs./2.7 kg.
3. H.44HT Handpiece: This special square drive, collet style handpiece is for exclusive use with our Series TXH, SRH and LXH heavy duty flex shafts. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. This handpiece is specialized and is NOT a member of the Foredom system of “interchangeable” handpieces. 4. AKHK25: This 10-pc accessory kit includes 2 aluminum oxide points, 2 CeramCut Blue stones, 1 carbide bur and 5 different mandrels fro grinding wheels and cartridge rolls. All with 1/8″ shanks.
5. Flexible shaft grease and spare motor brushes.
|
Complete Heavy Duty, Square Drive Assembly includes S-10823 Square Drive inner shaft (63-3/4″ long) and S-10801TX Heavy Duty outer sheath (63″ long) with SS10819 Silencer Spring. Offered here for replacement on Series SRH, TXH and LXH motors. Assembly comes pre-lubricated from factory. Square drive shafts can only be used with Foredom’s square drive handpieces.
This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. The bottom surface of the C. SCT is covered with non-skid material. It features the same durable, solid state electronics as the C.FCT. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.SR, M.SRB, M.SRH and M.SRBH motors. CSA Listed. It is interchangeable with Foredom’s C.FCT-1 and C.EM-1 controls. 6-3/4″ long, 4″ wide, 2-3/8″ high, ship wt-6 lbs./2.7 kg.Can also be used with these discontinued motors- Series CC and DD, Series L and LB, Series F, Series PG and 1/8 Horsepower Series S, SB, SR and SRB motors.
The C.SCT-1 can also used with a Dremel 732 flex shaft tool to vary speed.
Current Foredom motors (not the shaft and sheath but the motor itself) should NEVER be lubricated. The following older models do require routine lubrication:
Series CC, DD and MM sleeve bearing motors
Series EE, GG, and MMG motors
Series R and RB motors
Duplex spring handpieces (H.8D, H.10D, H.15D, H.18D, H.20D, H.52D, H.55D and H.56D) all require lubrications in the duplex spring component
H.10 Quick Change handpiece requires lubrication after first 2-3 months of use
H.15 Hammer handpiece requires periodic lubrication
H.55A and H.56A Angle handpieces require periodic lubrication
Foredoms MALC30 Jumbo Work Chamber is a semi-enclosed, substantial sheet metal unit designed for use with our new MADC20 Dust Collector or other dust collection system. It comes with a bright LED light that can be moved around and made to stay in place with its magnetic base. The Chamber is a great addition to the benches of woodcarvers and fabricators of all kinds working with small to medium size workpieces. Chamber keeps dust and debris contained when grinding, sanding, polishing and drilling. It’s shield and LED Light offer excellent visibility and well-designed arm openings and padded arm rest provide full range of motion and comfort. Chamber comes disassembled but is easy to build with just a phillips screwdriver.
The Jumbo Chamber is great for many woodcarving projects from hogging out blocks of wood to delicate detailing. It’s removable tray makes for easy clean up of large debris. Unit also ideal for sifting enamel with the shield up and the MADC20 Dust Collector set at low to med vacuum speeds
Handpiece H8D
Handpiece H8
Handpiece H50C
Recommended Speed:
Optimum Speed Range- 3,000-10,000 rpm.
Max. Operating Speed- 18,000 rpm.
Handpiece specifications: 6″ long, 1″ in diameter, weight: 4.6 oz.
Handpiece H50
Foredom’s chisel handpiece gives a power assist to carving projects in all types of wood, plastic, and plaster. This handpiece has a contoured body design that features a rugged plastic barrel and tapered aluminum ends. The easy to maintain chisel handpiece is recommended for use at low speed with Series TX and LX motors and in forward rotation only with Series SR motors. Handpiece attaches to any flex shaft machine with a standard key tip shaft. The Chisel Handpiece must be used only in the forward motor direction.
Recommended Speed:
Optimum Speed Range- 3,000-10,000 rpm.
Max. Operating Speed- 18,000 rpm.
Handpiece specifications: 6″ long, 1″ in diameter, weight: 4.6 oz.
The H.50 does not come with any chisels.
Handpiece H44T
Handpiece 44HT
The H.44HT is a collet type square drive handpiece that accepts accessories with up to 1/4″ diameter shanks. Has positive locking mechanism (locking ring) for use with Series SRH, TXH, LXH and discontinued H motors and pre-lubricated ball bearings that do not require maintenance. Comes with 3/32″, 1/8″ and 1/4″ (installed) collets, pin and wrench for changing collets and accessories.
Handpiece H43T
Handpiece H30H
Handpiece H30
The H.30® general purpose handpiece has prelubricated ball bearings that do NOT require any additional lubrication. Comes with HPCK-0 Chuck Key in molded plastic handle for changing accessories. Replacement chuck keys are shown below in related products. 5-3/16″ long, 1″ dia., wt. 5.85 oz.
Various bench top tools attach to this versatile handpiece, such as the Foredom Angle Grinder Attachment, Belt Sander Attachment and Handpiece Holder.
Handpiece H28H
The H.28H is our newest collet type square drive handpiece that accepts accessories with up to 1/8″ diameter shanks. Unlike Foredom’s other square drive handpieces, this slender model attaches for use with Series SRH, TXH, LXH and discontinued H motors without a positive locking mechanism. Has pre-lubricated ball bearings that do not require maintenance. Comes with 3/32″ (installed) and 1/8″ collets, pin and wrench for changing collets and accessories.
Handpiece H28
7″ long, 4-1/2″ wide, 2-3/8″ high, ship wt-2 lbs./1 kg.Can also be used with these discontinued motors- Series CC and DD, Series L and LB, Series F, Series PG and 1/8 Horsepower Series S, SB, SR and SRB motors.The C.FCT-1 can also used with a Dremel 732 flex shaft tool to vary speed.
New Dual Speed Range table top speed control was designed for use with the reciprocating (not rotary) Foredom Filer. Set to ‘LO’, motor speed is restricted to between 1,000 – 10,000 RPM or 400 – 4,000 SPM – the Filer’s allowable speed range. Flipping the toggle switch to ‘HI’ permits use with rotary handpieces at regular motor speeds.
This control is also ideal for use with the reciprocating H.50 and H.50C Chisel Handpieces that have low recommended operating speeds of 1,000 – 8,000 RPM.
For use with 115 Volt M.SR, M.SRB, M.SRH and M.SRBH motors
For use with 115 Volt M.SR, M.SRB, M.SRH and M.SRBH motors.
Can also be used with these discontinued motors- Series CC and DD, Series L and LB, Series F, Series PG and 1/8 Horsepower Series S, SB, SR and SRB motors. The C.EM-1 can also used with a Dremel 731 flex shaft tool to vary speed.
5″ long, 5-3/4″ wide, 2-5/8″ high, ship wt-2 lbs./1 kg.
HP775 Duplex Adapter is for use with our standard key tip style shafting and key tip style handpieces. It turns any key tip style handpiece, including the popular H.30® and H.44T, into a duplex spring handpiece for added flexibility when needed. This adapter will turn any of the following standard handpieces into duplex spring models: H.30, H.30-C1, H.30-C2, H.44T, H.43T, H.28, H.8, H.18, H.20, H.52 and H.10.
These 6 handpieces already come in duplex models: H.8D, H.10D, H.15D, H.18D, H.20D, and H.52D.
Duplex springs and duplex spring adapters are subject to breakage and are NOT covered by warranty.
Not for use with H.50 Handpieces or with Foredom Filer, Angle Grinder or Belt Sander Attachments.
This handy plastic brush is great for clearing off a workpiece and moving wood chips, metal and other accumulating debris through the vacuum port and into the hose of a dust collector. The top end of the brush has a slide that exposes 3/4″ long and 1/2″ diameter bristles. The bottom end has a twist action to expose and retract 1-5/8″ long x 1″ diameter bristles. 5-1/2″ long when closed.
This is great if you want a second machine or have all the bits and just want the machine. It comes with a SR machine, Plastic foot Pedal and 44T handpiece NOTHING ELSE.
H.44T Handpiece:
This collet style handpiece is popular among woodcarvers as it accomodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. The H.44T is a member of the Foredom system of interchangeable handpieces.
Series SR Motor:
Foredom’s most popular and best motor for general use. The 1/6 hp, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It offers substantially more power than any of our older universal motors – 66% more than Series CC and 33% more than Series S and old SR motors. It comes equipped with a motor bale for hanging, and our standard 39″ long key-tip inner shaft and outer sheath for connecting to any of Foredom’s 19 interchangeable handpieces.
.FCT Speed Control:
Foredom’s most popular foot operated speed control. It has solid state electronics and comes in a heavy duty plastic housing with an extra wide design.
5400 TX Kit
PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.
1. Series TX Motor:
2. C.SXR Speed Control:
3. H.44T Handpiece: This collet style handpiece is popular among woodcarvers as it accomodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. The H.44T is a member of the Foredom system of interchangeable handpieces.
5300 Base Kit
PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.
1. M.SRM Motor Description:
Here a bench style version of Foredom’s 1/6 HP Series SR motor has an integrated dial speed control built into its cast-iron base for manual speed adjustment and easy placement anywhere on the workbench.
The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit.3. H.44T Handpiece:
This collet style handpiece is popular among woodcarvers as it accommodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. The H.44T is a member of the Foredom system of interchangeable handpieces.
12 pc. assortment kit with Typhoon and other carving burs.
5. Fur, Feathers, and Fins:
3 disc DVD set with in-depth instruction for beginning woodcarvers as well as detailed tips for more advanced power woodcarvers who want to enhance their technique. Filmed at the Vermont studio of renowned carver, Frank Russell, Fur, Feathers, & Fins shows the many steps involved in bringing simple blocks of tupelo wood to life. In over 3 hours of video material, Frank walks you through the set up of his work space, the tools he uses, safety concerns and lots more. He covers in great detail the carving of 3 different animal projects: A Cotton Tail Rabbit, Mallard Drake Duck, and Small Mouth Bass. Frank’s congenial manner and accomplished teaching style lend to the enjoyment of learning to carve.
6. Flexible shaft grease
Motor Details:
The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads.
Advantages of Running in Reverse:
Left handed users have more control of the cutting tool
Reverse helps to keep dust and other debris flying away from right handed users
Alternating motor direction helps to extend the life of certain abrasives
Reverse helps with accomplishing symmetrical grinding and carving techniques
Reverse makes it easier to back out stuck drill bits
Alternating motor direction makes it easier and faster to polish metals
