Category: Sharpening

$289.00

This machine will sharpen your Chisels and Knives better and faster

You will have a sharper edge, free of burrs.

Heavy Duty construction of steel and aluminium (no plastic).

1/4 H.P., 1/2″ shaft motor, switch and cable included.
– 4″ x 6-1/2″ table
– Takes standard 1″ x 42″ abrasive belts
– Automatic belt tension

Includes:

1” x 42” 120 grit blue Zirconia belt

1” x 42” 1200 grit 3M Trizact belt

1” x 42” 700 grit Trizact belt

1” x 42” Heavy Duty Leather Belt for final honing

 

Can buy just the motor or machine if you like

Share this with your friends
Singular name: Category: ,
$25.95

includes

2″ X 1 1/2″ Sanding Drum with 1/4″ Shank

2  Leather Honing Sleeves

Honing Compound

 

(we stock extra leather honing sleeves)

Share this with your friends
$32.95

Sharpening SS09 Sanding Drum information sheet

Includes

2″ X  1  1/2″ Sanding Drum with 1/4″ Shank

one each 120, 320 & 500 grit sanding Sleeves

Leather Honing Sleeve and Abrasive Stick

Share this with your friends
Singular name: Category: ,
$6.50

Blue in color. Used with cotton and felt buffs for pre-polishing and cutting down of platinum and other metals. Also for final polishing on acrylics. Made in USA

Share this with your friends
Singular name: Category:
No image
$9.95

Extra Leather Sleeve. This fits the Sanding Drum  ( 1 1/2″ x 2″)

Share this with your friends
Singular name: Category: ,
$19.95

It is primarily chromium oxide admixed with other fine abrasives to give the best combination of cutting speed and fine finish. The bonding is formulated for ease of charging. It will adhere equally well to felt, leather, or wood.

Cuts quickly but leaves a mirror finish with a light wax film. Ideal for carving tools and firmer gouges, it can be used for final honing of almost any tool. Also used with a felt wheel or leather belt for power honing or with a leather strop for hand honing. Available in 1 lb bar  $19.95,  8 oz half bar  $10.00.

Share this with your friends
Singular name: Category: ,
$19.95

The Flexcut SlipStrop is an economical way for maintaining our tools razor edge. It has been specially molded to allow for polishing and deburring the hard-to-reach areas on the inside of V-tools and gouges as well as the outside edge bevel. Includes a small bar of Flexcut Gold polishing compound and detailed instructions.

Share this with your friends
$28.95

The Leather Powerstrop kit provides a great way to maintain your Flexcut edges like new or remove any wire edge left from a sharpening stone when reshaping is required. Fits into any standard power drill. Includes only the flat leather wheel and polishing compound. Rated for 600-800 RPM.

Share this with your friends
$19.50

Our Flexcut Knife Strop has an 8” x 2” leather stropping surface, designed exclusively for stropping and keeping your knife blades razor sharp. Simply strop your knife blade away from the cutting edge on both sides to maintain your factory edge. Clamp or handheld ability; Flat and sturdy construction. Includes a 1 ounce bar of Flexcut Gold Polishing Compound designed to adhere to the strop by rubbing the bar on the leather surface of the strop

Share this with your friends
Singular name: , Category: ,
$11.50

Flexcut Gold polishing compound has been specially formulated to apply to the strop like a crayon. Its blend of aluminum and titanium oxide abrasives provides a balance between aggressive removal of hardened tool steels and offers a high-color polish.

Share this with your friends
$47.95

The Leather Powerstrop kit provides a great way to maintain your Flexcut edges like new or remove any wire edge left from a sharpening stone when reshaping is required. Fits into any standard power drill. Includes only the flat leather wheel and polishing compound. Rated for 600-800 RPM.

The Deluxe Powerstrop is identical to the standard PWS10 and contains an additional V-shaped leather wheel for buffing inside of V-tools and gouges.

Share this with your friends
$10.95
  • 1/2″ x 1-3/4″ Diamond impregnated dressing head
  • Quickly trues and reconditions the face of worn grinding wheels
  • Removes loading and surface glazing
  • Sturdy knurled handle
Share this with your friends
Singular name: Category: ,
$9.00
Caramel in color. Used with cotton and felt buffs. It is the hardest natural wax, non-tacky and regarded for its tough and wear resistant qualities. Especially good for producing a high luster on wood and painted surfaces. Made in USA.
Share this with your friends
Singular name: Category:
$16.95

The white aluminum oxide is the standard for grinding cutting tools such as chisels and plane irons. Unlike the gray wheels that come with most bench grinders, these wheels help keep your tool much cooler so your tool doesn’t overheat and weaken your cutting edge. 6″ x 3/4   150 grit very fine, 1″ arbor with bushings – 7/8, 3/4, 5/8, 1/2 arbors. Norton grinding wheels fit all popular bench and pedestal grinders. They are ideal for grinding, shaping and sharpening high speed or hardened steel tools. These wheels can be used dry, with water, or with oil.

Share this with your friends
Singular name: Category: ,
$6.95

It is primarily chromium oxide admixed with other fine abrasives to give the best combination of cutting speed and fine finish. The bonding is formulated for ease of charging. It will adhere equally well to felt, leather, or wood.

Cuts quickly but leaves a mirror finish with a light wax film. Ideal for carving tools and firmer gouges, it can be used for final honing of almost any tool. Also used with a felt wheel or leather belt for power honing or with a leather strop for hand honing

Share this with your friends
Singular name: Category: ,
No image

$0.00
Singular name: Category: ,
No image

$0.00
Singular name: Category: ,