Category: Woodburning

$12.95

Made from Basswood – the best type of wood for woodburning and woodcarving techniques.  Ready to paint, stain, woodburn, woodcarve, attach embellishments or rubber stamp.

Made in America.  8″ X 10″ X .75″

Share this with your friends
$12.95

Made from Basswood – the best type of wood for woodburning and woodcarving techniques. Ready to paint, stain, woodburn, woodcarve, attach embellishments or stamp.

Made in America.

8″ x 10″ X .75″

Share this with your friends
$12.95

Made from Basswood – the best type of wood for woodburning and woodcarving techniques. Ready to paint, stain, woodburn, woodcarve, attach embellishments or stamp.

Made in America.

8″ X 10″ X .75″

Share this with your friends
$4.95

GREY OR WHITE $4.95 EACH

  • 4 sheets
  • Waxless, greaseless, smudge proof
  • Erasable on sealed surfaces, won’t bleed through paint
  • Cut and use what you need
  • 9″ x 13″

Graphite Transfer paper 12″ x 24″  $3.95 EACH

Share this with your friends
$0.00

These are the tips we have in stock at this time  $6.00 EACH

1S, 1M, 1L, 1XS, 2M, 2S, 5S, 5M, 5SC, 7S, 7XS, 7M, 7L, 6MC, 6LC, 14S, 14M, 14L, 12XS, 9S, 99.008, 35S, 30M

Share this with your friends
Category:
$0.00

Set 5S   $21.60

Set 4FFF $33.50 or Set 4FFC  $33.50 feather formers

Set  99X5   $23.00

Set 8  $34.00

Set 5PY  $23.00

Set 5BC  $21.60

 

Share this with your friends
Category:
$0.00

Standard $28.50    Heavy Duty  $32.50

Spear  with fixed tip

F5M (HD5M)     F5S  (HD5S)     F5X2 ($39.50)

Share this with your friends
Category:
$0.00

Standard $28.50

Spear Curved with fixed tip

F12L       F12SX         F12SX2 ($39.50)

Share this with your friends
Category:
$0.00

Heavy Duty $32.50

Skew Shaped Shaft-Maker (for Quill-making) with fixed tip

HD15L (right hand)   HD15LH (left hand)

Share this with your friends
Category:
$0.00

Standard Pen $28.50     Heavy Duty   $32.50

Round Skew with fixed tip

F7L (HD7L)   F7M (HD7M)   F7S (HD7S)  F7XS

Share this with your friends
Category:
$0.00

Standard Pen $28.50              Heavy Duty $32.50

Skew With Fixed Tip

F1L (HD1L)     F1M (HD1M)    F1S  (HD1S)   F1XS

 

 

 

 

 

 

 

 

Share this with your friends
Category: ,
$0.00

Standard Pen $28.50   Heavy Duty $32.50

Round With Fixed Tip

F2L (HD2L)     F2M (HD2M)    F2S (HD2S)

Share this with your friends
Category:
$11.95

This ingenious tool removes carbon buildup from most sharp Razertip® tips quickly and easily. Prolongs tip life (compared to using abrasives). One hand operation; works without turning off power. New design includes a flip-away blade cover for safety.

Note: We suggest that you never use abrasives to clean burner tips. Abrasives wear your tip out and will cause it to carbon up quicker than if you scraped it. We realize that some manufacturers advocate abrasives to clean tips. Either they don’t know about scraping or they have other motives (i.e. selling you more tips). Scraping works best!

Share this with your friends
Singular name: Category: ,
$200.00

SS-D10HD Woodburner

The SS-D10is Razertip’s workhorse, with many features not found on any other burner. Dual handpiece capability allows you to have 2 pens plugged in at the same time and change between them at the flick of a switch. This is particularly useful if your work calls for frequent handpiece changes as it saves time as well as wear on the connectors. The SS-D10’s extra low-end temperature adjustment allows you to turn the heat down further if the “1” setting is still too hot. If you are sculpting wax or detailing plastics, you’ll love the extra range available on the low end of the SS-D10. The only difference is the HD has a heavy Duty pen and cord HD1L or any pen of equal value.

Unconditional warranty covers everything (and we mean everything!) for 3 years on the power supply and one year on all handpieces including fixed tips. Even if you drop your pen and break the tip – it is covered!

Share this with your friends
Singular name: Category: ,
$195.00

SS-D10 Woodburner

The SS-D10is Razertip’s workhorse, with many features not found on any other burner. Dual handpiece capability allows you to have 2 pens plugged in at the same time and change between them at the flick of a switch. This is particularly useful if your work calls for frequent handpiece changes as it saves time as well as wear on the connectors. The SS-D10’s extra low-end temperature adjustment allows you to turn the heat down further if the “1” setting is still too hot. If you are sculpting wax or detailing plastics, you’ll love the extra range available on the low end of the SS-D10.

Unconditional warranty covers everything (and we mean everything!) for 3 years on the power supply and one year on all handpieces including fixed tips. Even if you drop your pen and break the tip – it is covered!

 

Share this with your friends
Singular name: Category: ,
$150.00

SKHD Woodburner

Don’t let the SK’ssmall size fool you. Packed with the same power and CSA NRTL/C certified circuitry as the SS-D10, the SK is great as a starter unit or as a second burner for the serious artist. So what’s the difference from the SS-D10? The SK will accept only one handpiece at a time, making it necessary to unplug and plug in handpieces when changing over, and it’s lacking the extra-low-end temperature adjustment. Other than that, it’s essentially the same unit as the SS-D10. The only difference with the SKHD is a heavier cord and Pen. Comes with a HD1L pen or any of equal value.

Unconditional warranty covers everything (and we mean everything!) for 3 years on the power supply and one year on all handpieces including fixed tips. Even if you drop your pen and break the tip – it is covered!

 

 

Share this with your friends
Singular name: Category: ,
$145.00

Sk Woodburner

Don’t let the SK’ssmall size fool you. Packed with the same power and CSA NRTL/C certified circuitry as the SS-D10, the SK is great as a starter unit or as a second burner for the serious artist. So what’s the difference from the SS-D10? The SK will accept only one handpiece at a time, making it necessary to unplug and plug in handpieces when changing over, and it’s lacking the extra-low-end temperature adjustment. Other than that, it’s essentially the same unit as the SS-D10. Comes with F1L Pen or any of equal value.

Unconditional warranty covers everything (and we mean everything!) for 3 years on the power supply and one year on all handpieces including fixed tips. Even if you drop your pen and break the tip – it is covered!

 

Share this with your friends
Singular name: Category: ,
$0.00
If you have a woodburner now all you really need is the base unit. All your pens will work on it.
“Revolutionary” is the word we have heard most when people experience the Razertip P80 for the first time. The P80 is the world’s first pyrographic tool to incorporate a fully regulated, stabilized power supply (100-240VAC; 50 or 60Hz) and a digital touch-screen interface. Plug it in anywhere world-wide, input your desired heat setting and you are burning away in just a few seconds. With 700 heat settings the P80 can be set low enough to work with jeweller’s wax (approx. 80 degrees C) to red-hot (800 degrees C). Voltage fluctuations do not phase the P80 at all – the tip temperature at your chosen heat setting stays rock-steady regardless of what is happening with the power available. The P80 offers better-than-ever tip heat recovery, and is compatible with all existing Razertip pens and accessories.

Each P80 or P80x includes an extra-flex pen cord (#CORD1P) which works beautifully with any Razertip pen or tip. The P80’s unique power output means that heavy-duty cords are no longer needed to make a difference when burning with heavier tips.

The P80 is a single burner – but with a huge difference. Want a dual or triple burner? Quickly and easily add up to two P80x expansion modules (no tools required) for a versatile system that gives each pen its own heat setting and memory function. Toggle between pens by touching the screen you wish to use.

As with everything we make – the P80 is proudly made in Canada – right here at our facility – it is covered by our exclusive 3-year unconditional warranty, and it is safety-certified virtually world-wide. By simply changing the power cord*, or using a suitable plug adapter, you can use your P80 anywhere.

* safety-approved IEC C8 power cord for the country where the unit is being used.

  • fully regulated, stabilized power supply and a digital touch-screen interface.
  • Heat Input Range: digitally input via 3.5” touch-screen, settings “100” to “800” **
  • Temperature range: 340°F (80°C) to 1400°F (800°C) approx.
  • Built-in memory function, recall the 3 most recently-input keyed in heat settings
  • Add up to two P80x expansion modules
  • indexed handpiece indicator light can help confirm proper pen and cord operation
  • compatible with all existing Razertip pens and accessories.
  • 3 year unconditional warranty covers everything (and we mean everything!)
Share this with your friends
$375.00

The Razertip Razaire Z530 dust collector is a quiet, ultra-efficient, portable, modular dust management system. It comes with a 2 inch standard filter, filter frame and 8 inch hood. Collects dust at the source (rotary carving tools, belt sanders, etc.) to overall shop air filtration. (Suggested Retail Price $399.00)

The supplied standard 2″ filter is easily removed for cleaning (filter is cleaned by tapping it into a plastic bag or a garbage can). It can be cleaned many times before replacement is necessary. The Flameproof ABS cabinet has a built-in lamp holder that accepts a standard swing-arm lamp (not included), giving you excellent light where you need it most – right at the intake. Also supplied with an 8 inch acrylic hood that breaks down into 3 flat panels for portability.

Several accessories can be added to increase the versatility of this system – everything from adding higher efficiency filters or extra filter stages (for increased efficiency) to a 4″ hose adapter, a lap-top tray, a motor tool hanger, and a deflector to direct the air towards the back.

120 Volts AC, 60Hz. Safety certified for Canada and the United States. csa certified for Canada and the United States

Share this with your friends
Singular name: Category: , ,
$0.00

Standard   $28.50    Heavy Duty $32.50

Knife with fixed tip

F14M (HD14M)   F14S (HD14S)

Share this with your friends
Category:
$32.50
Binding-post Interchangeable-tip Pen

The best interchangeable-tip pen in the world! Before the Razertip BPH, interchangeable-tip pens meant a compromise: either they used a wire-and-post system (like our earlier model ITH pen, no longer available), or you had to buy an expensive tip with a special molded plug (like Colwood) that was not rigid enough for precision work. Say goodbye to compromise!

The BPH is supplied with 3″ lengths of Heavy Duty, Standard, and Light Duty tip wire so you can make your own tip shapes (extra tip wire available below). Great for simple monograms, brands, or for those special tips that you may not use very often. Buy several BPH pens to save time changing tips – it’s always faster to change pens than tips. The BPH will also accept most interchangeable Razer-tips (it will be necessary to slightly spread the tip posts on tips made for the ITH pen).

The BPH is also the only pen made that lets you install two tips at once for perfect parallel lines or faster feather and hair texturing (higher heat setting will be necessary and a heavy-duty cord is recommended when using 2 tips). The BPH is cooler on your fingers than any other interchangeable-tip handpiece, and it’s built to last a lifetime.

We also have Tip Wire to make your own tips
Assorted package  $9.80 (6pc. 2 each 18, 20 & 22 ga)
TW3.2006  $6.25  (3 pcs standard wire 20ga.)
Share this with your friends
Category: ,
$34.50
Similar to the 15L. This is the style of shaft-making tip preferred by Bob Guge. This is a Heavy Duty Right Pen.

For most users we recommend the HD pens, they will withstand more sideways pressure without bending.

Share this with your friends
Category:
$1.65

Extra-thick foam grip fits standard Razertip pens. Great for extra compfort, especially if you have sensitive fingers or like to burn at high heat settings. Also popular with artists who prefer the feel of a larger pen.

Share this with your friends
Singular name: Category: ,
$1.65

Replacement foam grip for standard Razertip pens. This is the foam grip orignally supplied with our standard pens.

Share this with your friends
Singular name: Category: ,
$18.50

Heavy Duty Cord 12″ – RCA(M) to 1/4″ (F) – store.razertip.com

Razertip heavy-duty #8 cord. A 12″ Heavy-duty adapter cord allows use of Detail Master pens on Razertip burner.
Share this with your friends
Category:
$17.50
Razertip super flex #5 cord, with one RCA male and two banana connectors. Allows the use of Razertip pens on power supplies that have two banana connectors.

1M (39”) long.

Not available in HD.

Share this with your friends
Singular name: Category: ,
$18.50

Razertip heavy-duty #4 cord, with one RCA male and two “U” connectors. Allows the use of Razertip pens on power supplies using a screw terminal block. Example: some Colwood burners.
1M (39”) long.

Standard “FL” cords (black plugs) use an 18-gauge cord for maximum flexibility. Heavy-Duty “HD” cords (red plugs) use a 16-gauge cord for maximum current flow, but it’s not quite as flexible. For fastest tip heat recovery the HD cord is recommended. Any of our pens work on either cord, but HD and Feather Former pens/tips work best with HD cords.

Share this with your friends
Singular name: Category: ,
$17.50

Razertip super flex #4 cord, with one RCA male and two “U” connectors. Allows the use of Razertip pens on power supplies using a screw terminal block. Example: some Colwood burners.

1M (39”) long.

Standard “FL” cords (black plugs) use an 18-gauge cord for maximum flexibility. Heavy-Duty “HD” cords (red plugs) use a 16-gauge cord for maximum current flow, but it’s not quite as flexible. For fastest tip heat recovery the HD cord is recommended. Any of our pens work on either cord, but HD and Feather Former pens/tips work best with HD cords.

Share this with your friends
Singular name: Category: ,
$19.50

Razertip heavy-duty #3 cord, with one RCA male and one 1/4” phone plug. Allows the use of Razertip pens on power supplies with a 1/4” phone jack (Detail Master, etc.).

1M (39”) long.

Standard “FL” cords (black plugs) use an 18-gauge cord for maximum flexibility. Heavy-Duty “HD” cords (red plugs) use a 16-gauge cord for maximum current flow, but it’s not quite as flexible. For fastest tip heat recovery the HD cord is recommended. Any of our pens work on either cord, but HD and Feather Former pens/tips work best with HD cords.

Share this with your friends
Singular name: Category: ,
$18.50
Razertip heavy duty #2 cord, with one male and one female RCA conector. Allows you to use other pens (Colwood, Nibs, Optima) on a Razertip power supply. .
1M (39”) long.

Standard “FL” cords (black plugs) use an 18-gauge cord for maximum flexibility. Heavy-Duty “HD” cords (red plugs) use a 16-gauge cord for maximum current flow, but it’s not quite as flexible. For fastest tip heat recovery the HD cord is recommended. Any of our pens work on either cord, but HD and Feather Former pens/tips work best with HD cords.

Share this with your friends
Singular name: Category: ,
$18.50

Razertip heavy-duty #1 cord for Razertip burners and pens, one male connector on each end.. Also allows use of Razertip pens on other power supplies using an RCA connector. Example: Optima, Nibs.

1M (39”) long.

Standard “FL” cords (black plugs) use an 18-gauge cord for maximum flexibility. Heavy-Duty “HD” cords (red plugs) use a 16-gauge cord for maximum current flow, but it’s not quite as flexible. For fastest tip heat recovery the HD cord is recommended. Any of our pens work on either cord, but HD and Feather Former pens/tips work best with HD cords.

Share this with your friends
Singular name: Category: ,
$17.50

Razertip standard super flex #1 cord supplied with Razertip burners. Also allows use of Razertip pens on most other burners that use an RCA connector, example: Optima, Nibs.

1M (39”) long.

Standard “FL” cords (black plugs) use an 18-gauge cord for maximum flexibility. Heavy-Duty “HD” cords (red plugs) use a 16-gauge cord for maximum current flow, but it’s not quite as flexible. For fastest tip heat recovery the HD cord is recommended. Any of our pens work on either cord, but HD and Feather Former pens/tips work best with HD cords.

Share this with your friends
Singular name: Category: ,
$24.95

Thick Basswood Country Rounds® are trendier than ever.  Our thick rounds are a little over 1.5” thick and both sides are sanded smooth and ready for use.  We take great pride in the quality of our signature Basswood Country Rounds® which are the original bark edge cross-cut pieces of wood brought to market over 40 years ago. Each round is unique and can be used for many different crafting, DIY, and home décor projects. Uses include:  food display, cake stands, bell jar terrariums, apothecary jar stands, plant stands, candle displays, and rustic tablescape designs. Can also be woodburned and carved in.

Dimensions: 9-11.5” Wide x 1.63” Thick

Share this with your friends
$11.95

Our Basswood Country Rounds® are the original cross-cut rounds brought to market over 40 years ago. This unique bark edge surface is ideal for wood burning, hot stamping, and wood carving. Other creative ideas include: plate chargers, wedding décor, string art, game boards, chalkboards, candle and vase trivets, and serving boards.

Dimensions:

  • Height of individual Rounds will vary
  • Depth of individual Rounds is 0.63″
  • Small – approximately 5.00″ to 7.00″ wide
Share this with your friends
$15.95

Our Basswood Country Planks® are the original planks brought to market over 40 years ago. This unique bark edge surface is ideal for wood burning, hot stamping, and wood carving. Other creative ideas include: plate chargers, wedding décor, string art, game boards, chalkboards, candle and vase trivets, and serving boards.

Kiln dried and naturally untreated.

Dimensions:

  • Depth of individual planks is 0.63″
  • Small – Height = 11.00″ Width approximately 7.00″ to 9.00″
Share this with your friends
$14.95

Our Basswood Country Rounds® are the original cross-cut rounds brought to market over 40 years ago. This unique bark edge surface is ideal for wood burning, hot stamping, and wood carving. Other creative ideas include: plate chargers, wedding décor, string art, game boards, chalkboards, candle and vase trivets, and serving boards.

Kiln dried and naturally untreated.

Dimensions:

  • Height of individual Rounds will vary
  • Depth of individual Rounds is 0.63″
  • Medium – approximately 7.00″ to 9.00″ wide
Share this with your friends
$18.95

Our Basswood Country Planks® are the original planks brought to market over 40 years ago. This unique bark edge surface is ideal for wood burning, hot stamping, and wood carving. Other creative ideas include: plate chargers, wedding décor, string art, game boards, chalkboards, candle and vase trivets, and serving boards.

Kiln dried and naturally untreated.

Dimensions:

  • Depth of individual planks is 0.63″
  • Medium – Height = 13.00″ Width approximately 9.00″ to 11.00″
Share this with your friends
$16.95

Our Basswood Country Rounds® are the original cross-cut rounds brought to market over 40 years ago. This unique bark edge surface is ideal for wood burning, hot stamping, and wood carving. Other creative ideas include: plate chargers, wedding décor, string art, game boards, chalkboards, candle and vase trivets, and serving boards.

Dimensions:

  • Large – approximately 9.00″ to 11.00″ wide and .63″ thick
Share this with your friends
$20.95

Our Basswood Country Planks® are the original planks brought to market over 40 years ago. This unique bark edge surface is ideal for wood burning, hot stamping, and wood carving. Other creative ideas include: plate chargers, wedding décor, string art, game boards, chalkboards, candle and vase trivets, and serving boards.

Kiln dried and naturally untreated.

Dimensions:

  • Depth of individual planks is 0.63″
  • Large – Height = 16.00″ Width approximately 11.00″ to 13.00″
Share this with your friends
$24.95

Our Basswood Country Planks® are the original planks brought to market over 40 years ago. This unique bark edge surface is ideal for wood burning, hot stamping, and wood carving. Other creative ideas include: plate chargers, wedding décor, string art, game boards, chalkboards, candle and vase trivets, and serving boards.

Kiln dried and naturally untreated.

Dimensions:

  • Depth of individual planks is 0.63″
  • Extra Large – Height = 23.00″ Width approximately 8.00″ to 10.00″
Share this with your friends