Foredom Handpieces Archives - KV Woodcarving Supplies https://kvwoodcarvingsupplies.com/product-category/foredom-tools/foredom-handpieces/ For All Your Carving Needs Thu, 07 Aug 2025 14:27:15 +0000 en-US hourly 1 Foredom Handpiece H50C https://kvwoodcarvingsupplies.com/product/foredom-handpiece-h50c/ Wed, 03 May 2023 20:32:24 +0000 http://kvwoodcarvingsupplies.com/product/foredom-handpiece-h50c/ Handpiece H50C Foredom’s Chisel Handpiece is for carving in all types of wood, plastic, plaster and soft carving stone. It connects to a key tip quick disconnect flexible shaft which can be powered by an M.SR, M.TX, M.LX flex shaft … Continue reading →

The post Foredom Handpiece H50C appeared first on KV Woodcarving Supplies.

]]> Handpiece H50C

Foredom’s Chisel Handpiece is for carving in all types of wood, plastic, plaster and soft carving stone. It connects to a key tip quick disconnect flexible shaft which can be powered by an M.SR, M.TX, M.LX flex shaft motor or other motor that can power a key tip quick disconnect flexible shaft (a Flexade can also be used!). Itis a reciprocating ‘hammer’ type handpiece that requires a light pressure to start the hammering chisel action. It has a stroke length of 1/8″ (3.2mm). It has a rugged textured plastic barrel & tapered aluminum front end.
MUST BE USED IN FORWARD MOTOR DIRECTION ONLY – if you are using it with a motor that can go in reverse.
TIP: We recommend using this handpiece with Series TX and LX or Series SR motors in forward rotation only.
Recommended Speed:
Optimum Speed Range- 3,000-10,000 rpm.
Max. Operating Speed- 18,000 rpm.
Handpiece specifications: 6″ long, 1″ in diameter, weight: 4.6 oz.
The H.50C comes with a set of  pre-sharpened steel cutters

The post Foredom Handpiece H50C appeared first on KV Woodcarving Supplies.

]]> Foredom Handpiece H44HT https://kvwoodcarvingsupplies.com/product/foredom-handpiece-h44ht/ Thu, 27 Apr 2023 18:26:32 +0000 http://kvwoodcarvingsupplies.com/?post_type=product&p=1499 Collet-style handpiece for use with Series SRH, TXH and LXH square drive flex shafts ONLY. Comes with 3/32″, 1/8″, 1/4″ collets.

The post Foredom Handpiece H44HT appeared first on KV Woodcarving Supplies.

]]> Collet-style handpiece for use with Series SRH, TXH and LXH square drive flex shafts ONLY. Comes with 3/32″, 1/8″, 1/4″ collets.

The post Foredom Handpiece H44HT appeared first on KV Woodcarving Supplies.

]]> Foredom Handpiece Holder https://kvwoodcarvingsupplies.com/product/foredom-handpiece-holder/ Mon, 03 Apr 2023 20:32:26 +0000 http://kvwoodcarvingsupplies.com/product/foredom-handpiece-holder/ For use with H.30, H.30H, H.30SJ, H.43T, H.44A, H.44B, H.44T and H.44HT Handpieces. (handpiece not included)

The post Foredom Handpiece Holder appeared first on KV Woodcarving Supplies.

]]>
For use with H.30, H.30H, H.30SJ, H.43T, H.44A, H.44B, H.44T and H.44HT Handpieces. (handpiece not included)

The post Foredom Handpiece Holder appeared first on KV Woodcarving Supplies.

]]> Foredom Handpiece H50 https://kvwoodcarvingsupplies.com/product/foredom-handpiece-h50/ Mon, 03 Apr 2023 20:32:24 +0000 http://kvwoodcarvingsupplies.com/product/foredom-handpiece-h50/ Handpiece H50 Foredom’s chisel handpiece gives a power assist to carving projects in all types of wood, plastic, and plaster. This handpiece has a contoured body design that features a rugged plastic barrel and tapered aluminum ends. The easy to maintain chisel … Continue reading →

The post Foredom Handpiece H50 appeared first on KV Woodcarving Supplies.

]]> Handpiece H50

Foredom’s chisel handpiece gives a power assist to carving projects in all types of wood, plastic, and plaster. This handpiece has a contoured body design that features a rugged plastic barrel and tapered aluminum ends. The easy to maintain chisel handpiece is recommended for use at low speed with Series TX and LX motors and in forward rotation only with Series SR motors. Handpiece attaches to any flex shaft machine with a standard key tip shaft. The Chisel Handpiece must be used only in the forward motor direction.
Recommended Speed:
Optimum Speed Range- 3,000-10,000 rpm.
Max. Operating Speed- 18,000 rpm.
Handpiece specifications: 6″ long, 1″ in diameter, weight: 4.6 oz.

The H.50 does not come with any chisels.

The post Foredom Handpiece H50 appeared first on KV Woodcarving Supplies.

]]> Foredom Handpiece H30H https://kvwoodcarvingsupplies.com/product/foredom-handpiece-h30h/ Mon, 03 Apr 2023 20:32:24 +0000 http://kvwoodcarvingsupplies.com/product/foredom-handpiece-h30h/ The H.30H square drive handpiece has a geared 3-jaw #0 chuck with 0-5/32″ (4mm) capacity. Includes chuck key in molded handle. Has positive locking mechanism (locking ring) for use with Series SRH, TXH, LXH and discontinued H motors. 5-13/16″ long, … Continue reading →

The post Foredom Handpiece H30H appeared first on KV Woodcarving Supplies.

]]> The H.30H square drive handpiece has a geared 3-jaw #0 chuck with 0-5/32″ (4mm) capacity. Includes chuck key in molded handle. Has positive locking mechanism (locking ring) for use with Series SRH, TXH, LXH and discontinued H motors.
5-13/16″ long, 1″ dia. (center)

The post Foredom Handpiece H30H appeared first on KV Woodcarving Supplies.

]]> Foredom Handpiece H28 https://kvwoodcarvingsupplies.com/product/foredom-handpiece-h28/ Mon, 03 Apr 2023 20:32:24 +0000 http://kvwoodcarvingsupplies.com/product/foredom-handpiece-h28/ The H.28 has a slender, comfortable design with tapered grip and pre-lubricated ball bearings that do not require any additional lubrication. Comes with 3/32″ and 1/8″ collets, and pin and chuck wrench for changing collets and accessories. 5-1/4″ long, 23/32″ dia. (center), … Continue reading →

The post Foredom Handpiece H28 appeared first on KV Woodcarving Supplies.

]]> The H.28 has a slender, comfortable design with tapered grip and pre-lubricated ball bearings that do not require any additional lubrication. Comes with 3/32″ and 1/8″ collets, and pin and chuck wrench for changing collets and accessories.
5-1/4″ long, 23/32″ dia. (center), 1/2″ dia. (taper), wt. 3 oz.

The post Foredom Handpiece H28 appeared first on KV Woodcarving Supplies.

]]> Foredom Handpiece H30 https://kvwoodcarvingsupplies.com/product/foredom-handpiece-h30/ Mon, 03 Apr 2023 20:32:24 +0000 http://kvwoodcarvingsupplies.com/product/foredom-handpiece-h30/ The H.30® general purpose handpiece has prelubricated ball bearings that do NOT require any additional lubrication. Comes with HPCK-0 Chuck Key in molded plastic handle for changing accessories. Replacement chuck keys are shown below in related products. 5-3/16″ long, 1″ dia., … Continue reading →

The post Foredom Handpiece H30 appeared first on KV Woodcarving Supplies.

]]> The H.30® general purpose handpiece has prelubricated ball bearings that do NOT require any additional lubrication. Comes with HPCK-0 Chuck Key in molded plastic handle for changing accessories. Replacement chuck keys are shown below in related products. 5-3/16″ long, 1″ dia., wt. 5.85 oz.

Various bench top tools attach to this versatile handpiece, such as the Foredom Angle Grinder Attachment, Belt Sander Attachment and Handpiece Holder.

The post Foredom Handpiece H30 appeared first on KV Woodcarving Supplies.

]]> Foredom Handpiece H44T https://kvwoodcarvingsupplies.com/product/foredom-handpiece-h44t/ Mon, 03 Apr 2023 20:32:24 +0000 http://kvwoodcarvingsupplies.com/product/foredom-handpiece-h44t/ The H.44T is a collet type handpiece that accepts accessories with up to 1/4″ diameter shanks. Has pre-lubricated ball bearings that require no additional lubrication. Comes with 3/32″, 1/8″ and 1/4″ collets, pin and wrench for changing collets and accessories. … Continue reading →

The post Foredom Handpiece H44T appeared first on KV Woodcarving Supplies.

]]> The H.44T is a collet type handpiece that accepts accessories with up to 1/4″ diameter shanks. Has pre-lubricated ball bearings that require no additional lubrication. Comes with 3/32″, 1/8″ and 1/4″ collets, pin and wrench for changing collets and accessories.
5-5/8″ long, 1″ dia. (center), 3/4″ dia. (taper), wt. 5.85 oz.

The post Foredom Handpiece H44T appeared first on KV Woodcarving Supplies.

]]> Foredom Handpiece H8D https://kvwoodcarvingsupplies.com/product/foredom-handpiece-h8d/ Mon, 03 Apr 2023 20:32:24 +0000 http://kvwoodcarvingsupplies.com/product/foredom-handpiece-h8d/ The H.8D has the same specs as the H.8, except includes a duplex spring for added flexibility. It is a slim collet type handpiece with pre-lubricated ball bearings that require no maintenance. It has a chuck guard that slides back when … Continue reading →

The post Foredom Handpiece H8D appeared first on KV Woodcarving Supplies.

]]> The H.8D has the same specs as the H.8, except includes a duplex spring for added flexibility. It is a slim collet type handpiece with pre-lubricated ball bearings that require no maintenance. It has a chuck guard that slides back when changing burs. Comes with 3/32″ (installed) and 1/8″ collets and chuck wrenches for changing collets and accessories.
Duplex springs are subject to breakage and are NOT covered by warranty. They are made of special steel, double wound tubular construction with a protective flexible spring cover. We recommend that only experienced users of flex shaft tools consider purchasing this style handpiece. For most users, the “straight” handpiece (H.8) is the preferrable solution.
9-3/8″ long, 5/8″ dia., wt. 5.2 oz.

The post Foredom Handpiece H8D appeared first on KV Woodcarving Supplies.

]]>