Category: Knives

Morakniv® Classic has been developed by Mora of Sweden for over a century, and has been utilized by generations of carpenters and wood carvers. The tradition can be explained by the knives being pleasant to work with and having just the right feel.
A reliable knife that has a given place among the tools of a handcrafter. Also used to a great extent by carpenters.

SPECIFICATIONS

Classic wood-splitting knife with carbon steel blade.

Blade Thickness: 0.1″ (0.25 cm)
Blade Length: 4.5″ (11.4 cm)
Total Length: 14.4″ (36.6 cm)
Net Weight: 5.4 oz. (154 g)
Areas of Use: Wood carving

By popular request, now available in Stainless Steel – The Mora Crook Knife 164 is a specialist hook knife for spoon and bowl carving. It has an oiled birch wood handle which provides excellent grip and control when carving. It will carve most types of wood including hard woods such as Cherry and Ash. Single-edged. Stainless steel blade. Oiled birchwood handle.

FEATURES

• – 0.5-Inch Internal Radius
• – Blade Thickness: 2.5mm
• – Blade Length: 50mm
• – Total Length: 160mm
• – Stainless Steel blade
• – Oiled birchwood handle
• – Supplied without sheath
• – Genuine MORA product. Made In Sweden

Our Carving Scrapers can remove any uneven surface or finish from your work without the use of sandpaper that costs money and creates airborne dust. Interchangeable Power Handle included.  SK121

Removes:

• Roughness on hand or power carving
• Ripple marks from moulding operations
• Excess glue in hard-to-reach areas
• Unwanted paint or other finishes

This molded leather sheath will fit any of the jackknives in our Carvin’ Jack Collection. Snap closure; Loop attaches easily to many belt styles. JKN06

KNL26 Left-Handed Hook Knife

The Hook Knife blade is curved, similar to a gouge, for working in hollows with ease and fast stock removal.

Comes with

Wooden Box

Strop + compound

13 flexcut knives

KN 37, 36, 35, 34, 33, 32, 31, 28, 26, 15, 20, 27 & 19

KN600 Beginner Palm & Knife Set

Our Beginner Palm & Knife Set is a great way to get started carving today. We have packaged our most popular palm tools and knives from our product line. (KN12 Cutting Knife, KN13 Detail Knife, FR307 Palm Parting Tool, FR306 Palm Sweep)

3-Knife Starter Set

We’ve packaged some of our most popular knives in one, 3-Knife Starter Set. These knives are made with the same edge-holding steel as our gouges and chisels. The comfortable curved ergonomic handle allows for long periods of carving without hand fatigue.

KN400 Slim-Handle Detail Knife Set

For younger carvers or crafts people, our slim handle 3-piece detail knife set is the perfect fit. These knives have the same high quality as other Flexcut carving tools, but their slender handles are better suited for smaller hands.

KN300 Whittler’s Kit

Whether you whittle professionally or just for fun, Flexcut’s whittling knives will give you better results. The razor sharp edge provides greater control over each cut and the ergonomic handle lets you carve longer without hand fatigue.

KN30 Hip Knife

Our Hip Knife (Cutting Knife) is a fine cutting tool that handles a wide range of woodcarving projects. The knife comes in a handsome leather sheath that attaches to any belt.

KN27 Mini-Detail Knife

The Mini-Detail Knife has our smallest 3/4″ straight blade. It is made from ultra-thin material to not disturb adjacent wood for very delicate cuts.

KN26 Right-Handed Hook Knife

The Hook Knife blade is curved, similar to a gouge, for working in hollows with ease and fast stock removal. The handedness (right or left) is designated by pulling the tool toward you.

KN20 Mini-Chip Knife

The Mini-Chip Carving Knife has a 5/8″ ultra-thin blade, making unwanted chipping in delicate cuts less likely.

KN19 Mini-Pelican Knife

Our Mini-Pelican Knife offers the same features as its larger brother (KN18) but with a 7/8″ ultra-thin blade for the lowest resistance when fine cutting is required.

KN18 Pelican Knife

The Pelican Knife has a curved 1-5/8″ blade that offers a clean slicing action similar to a skew. The point is narrowed for a tight turning radius while still being durable.

KN15 Chip Carving Knife

Our traditional Chip Carving Knife is a short-bladed knife used to make triangular shaped cuts to create intricate designs in wood. Designs carved in this fashion are cut into the wood or incised, not relieved.

KN14 Roughing Knife

Our Roughing Knife features a straight, 2″ blade for heavier stock removal with a rounded durable point.

KN13 Detail Knife

The Detail Knife has a very fine point for making the very narrow cuts associated with detailing. Its straight 1-1/2″ blade can accommodate larger stock removal if needed.

KN12 Cutting Knife

The Cutting Knife is a general purpose carving knife. Its more rounded point is very durable. Great beginners knife.

KN115 Chip Carving Set

Our Chip Carving Set features our Chip Knife, Mini-Chip Knife and Skew Knife — everything you need to create the intricate geometric or freestyle patterns that are the hallmark of the craft.

KN100 4-Piece Carving Knife Set

Each set includes: KN12 cutting knife, KN13 detail knife, KN18 pelican knife, KN19 mini-pelican knife and tool roll.

JNK91 Right-handed Carving Jack

The Carvin’ Jack is a complete carving kit in your pocket. At 3.5 ounces and a closed length of 4-1/4″, it features 6 locking edge tools. Each kit also includes a leather belt mounted sheath, a custom fit SlipStrop and Gold Polishing compound.

JKNL91 Left-handed Carving Jack

The Carvin’ Jack is a complete carving kit in your pocket. At 3.5 ounces and a closed length of 4-1/4″, it features 6 locking edge tools. Each kit also includes a leather belt mounted sheath, a custom fit SlipStrop and Gold Polishing compound.

The Detail Jack™ can handle a variety of projects start to finish. Its single detail knife quickly removes wood from convex surfaces, while its fine point is perfect for detailing delicate areas. The knife handle is crafted from aerospace-grade aluminum and is ergonomically designed to allow a strong grip for long periods of carving with minimal hand fatigue. Blade Also Locks

JKN89 Pocket Jack

This Flexcut Jack-Knife is a smaller version of our original Carvin’ Jack, the first folding multi-tool designed specifically for the needs of woodworking. At 3 ounces and a closed length of 4-1/4”, it features 4 locking edge tools.

JKN88 Whittling Jack

The Whittlin’ Jack features a 1 1/2″ Detail Knife and a 2″ Roughing Knife. It weighs 3 ounces and is just over 4″ long when closed.

The Tri-Jack Pro™ is the newest multi-tool in Flexcut’s jackknife series. As its name suggests, the Tri-Jack has three blades that lock in place – a roughing knife, detail knife, and mini-cutting knife. The well designed handle minimizes hand fatigue and is made of aerospace-grade aluminum with a quarter-cut cherry inlay

5″ Flexible Draw Knife

Our flexible draw knife has 5 inches of workable edge, designed to flex around contours where large amounts of stock need to be removed quickly. The tool can be flexed to accommodate concave or convex surfaces. Cuts can be made that conform more closely to the finished shape, taking less time to sand or scrape. The curved edge gives a skew-like cutting action for a low resistance cut. This tool works great for carving chair legs, hollowing chair bottoms or quickly roughing-out decoys. KN16

3″ Flexible Draw Knife

This handy little draw knife was developed for fan carving but works great for skinning bark and roughing-off corners. It fits nicely into the tool box. KN25

Brass Rivets

Great for joints in toys and making knives handles. Packages of set of 4

1/2″ to 3/4″     $1.50