Skew gouges are great for reaching into tight corners or carving figured wood. In certain instances they can carve against the grain while leaving a smooth cut. The set includes both left and right-handed versions of the #3 and #5 sweeps. A right-handed tool will have the point on the left side of the cutting edge. A left-handed tool will have the point on the right side of the cutting tool.
Palm Tools included: LS400 #3 x 9/16″ Left-Hand Skew, RS400 #3 x 9/16″ Right-Hand Skew, LS401 #5 x 9/16″ Left-Hand Skew, RS401 #5 x 9/16″ Right-Hand Skew.
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Our Right-Handed Scorp Set includes all 4 right-handed profiles, a tool roll and a custom molded strop to maintain your razor-sharp edges.
Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself (you can buy these in Left hand or right hand as a set or individually )
Flexcut Slip Strop + Box + 4 Palm Chisels $145.00 (regular price $161.25)
FR901 ( 1 1/8″ Chisel)
FR910 ( Lettering V X 1″ parting tool)
FR927 ( Thumbnail Gouge 1/2″)
FR970 (70 deg. X 5/8″ Parting Tool)
KN600 Beginner Palm & Knife Set
Our Beginner Palm & Knife Set is a great way to get started carving today. We have packaged our most popular palm tools and knives from our product line. (KN12 Cutting Knife, KN13 Detail Knife, FR307 Palm Parting Tool, FR306 Palm Sweep)
3-Knife Starter Set
We’ve packaged some of our most popular knives in one, 3-Knife Starter Set. These knives are made with the same edge-holding steel as our gouges and chisels. The comfortable curved ergonomic handle allows for long periods of carving without hand fatigue.
KN400 Slim-Handle Detail Knife Set
For younger carvers or crafts people, our slim handle 3-piece detail knife set is the perfect fit. These knives have the same high quality as other Flexcut carving tools, but their slender handles are better suited for smaller hands.
KN300 Whittler’s Kit
Whether you whittle professionally or just for fun, Flexcut’s whittling knives will give you better results. The razor sharp edge provides greater control over each cut and the ergonomic handle lets you carve longer without hand fatigue.
KN115 Chip Carving Set
Our Chip Carving Set features our Chip Knife, Mini-Chip Knife and Skew Knife — everything you need to create the intricate geometric or freestyle patterns that are the hallmark of the craft.
KN100 4-Piece Carving Knife Set
Each set includes: KN12 cutting knife, KN13 detail knife, KN18 pelican knife, KN19 mini-pelican knife and tool roll.
Designed for extreme detail used in netsuke or caricature carving. These tools have their edges forged down even thinner than our other palm tools. Cutting with these fine edges allows the carver to work extremely close to adjacent detail without crushing wood fibers that can lead to “chipping out.” The 45 degree V-tool offers a deep, dark, visible cut while keeping an ultra narrow width.
These tools give maximum wood removal with minimum effort. They are designed for carvers with the confidence to hog wastewood off quickly and save roughing-out time.
As the name implies, this set was made for miniature carving. Model-makers, as well as those who enjoy carving fine detail, find these tools quite handy. Ranging in size from 1/8-inch down to 1/16-inch, these tools make others seem like crayons when you really need a sharp pencil.
This set is a combination of the FR310 and FR404 palm sets. The regular palm for detail and the wide format for roughing-out makes this a great collection in one convenient box.
For those who require the close control of a palm-sized tool but need to remove larger amounts of wood. Their low-resistance edge give them the feel of a narrower tool.
This very popular set is great for those just getting started or those with more experience who like to carve smaller sized projects. The handle fits comfortably in the palm, allowing for good control close to your work. The five profiles can perform a variety of tasks and carve moderate detail.
Palm Tools included: FR308 #2 x 5/16″, FR305 #3 x 3/8″, FR306 #6 x 5/16″, FR309 #11 x 1/8″, FR307 70 deg. x 1/4″.
Our Deluxe Starter Set has everything a new wood carver needs. It includes 16 interchangeable blades, cutting knife, quick connect handle and a mallet power handle. There’s also a SlipStrop, gold compound and an owner’s manual showing how to care for your tools. Plus you’ll find a free step-by-step DVD for a great first project. This is our most complete carving set all in one box. It has everything you need, whether it be for mallet, palm or knife carving. There is even a place to store an optional Universal Adapter for using these tools with your reciprocating power carver.
The 16 gouge profiles featured in this kit are not included in any other SK carving set.
THIS SET IS BEING SHIPPED WILL HAVE BEFORE CHRISTMAS LET ME KNOW IF YOU WANT ME TO HOLD YOU A SET.
Our 11-Piece Craft Carver Set contains ten carving blades, an interchangeable ABS handle, leaf project carving blank, and an 11-pocket tool roll. Rolled up, this set is extremely portable. An owner’s manual is also included with step-by-step instructions for completing the project.
Profiles included: SK329 #1 x 1/4″, SK305 #3 x 3/8″, SK400 #3 x 5/8″, SK401 #5 x 9/16″, SK306 #6 x 5/16″, SK801 #9 x 1.5mm, SK309 #11 x 1/8″, SK408 #11 x 1/4″, SK803 45 deg. x 1mm, SK307 70 deg. x 1/4″.
The Beginner 2-Blade Craft Carver Set has everything needed to tackle a first time project. It comes with two carving blades – a V-Tool and a gouge – plus an interchangeable ABS handle. A basswood blank for the leaf carving project and a second blank for practicing cuts are included. There is also a project DVD with step-by-step visual instructions as well as a 24-page owner’s manual that outlines the leaf project and provides maintenance and safety tips for beginners.
This is an affordable set for beginners and those who want to give woodcarving a try.
Profiles included: SK306 #6 x 5/16″, SK307 70 deg. x 1/4″.