Bits Archives - KV Woodcarving SuppliesKV Woodcarving Supplies

Wet Stick

2 x 1/2 x 3/4 $3.50

1 x 1/2 x 1/2 $2.00

Used wet for unloading diamond points

Share this with your friends

Singular name: Bits Category: Assorted

Unmounted Bristle Brush 1″

Unmounted Bristle Brush with soft hair bristles in a wheel shape has a 3/4″ head dia. and 3/16″ trim length, fits on a mandel M13 or M14

Made in USA. 25,000 RPM Max Speed.

Bristle Brushes are used to clean and prepare surfaces for buffing and polishing. Bristles are securely held in steel rings, evenly distributed and trimmed. The wheel will work on flat, curved, hard-to-reach surfaces.

Share this with your friends

Singular name: Bits Category: Assorted, Bits

Unmounted 1″ saw

about .1m thick # PF-189-250

Share this with your friends

Singular name: Bits Category: Assorted

Typhoon 3/32″ Shank Taper KB32915

Typhoon carbide taper. 5/16″ head dia. x 1/2″ head length fine blue #KB32915

Share this with your friends

Singular name: Bits Category: Typhoon, Typhoon 3/32" Shank

Typhoon 3/32″ Shank Sphere KB32315

Typhoon carbide sphere. 5/16″ head dia, fine grit only, 2.35mm (3/32″) shank. Fine Blue #KB32315

Share this with your friends

Singular name: Bits Category: Typhoon, Typhoon 3/32" Shank

Typhoon 3/32″ Shank Long Taper KB32119

Typhoon carbide long taper. 3/16″ head dia. x 3/4″ head length fine blue #KB32119

Share this with your friends

Singular name: Bits Category: Typhoon, Typhoon 3/32" Shank

Typhoon 3/32″ Shank Flame KB32913

Typhoon carbide flame. 5/16″ head dia. x 1/2″ head length fine blue #KB32913

Share this with your friends

Singular name: Bits Category: Typhoon, Typhoon 3/32" Shank

Typhoon 3/32″ Shank Cylinder KB32519

Typhoon carbide cylinder. 5/16″ head dia. x 1/2″ head length fine blue #KB32519

Share this with your friends

Singular name: Bits Category: Typhoon, Typhoon 3/32" Shank

Typhoon 3/32″ Shank Ball Nose KB32719

Typhoon carbide ball nose. 5/16″ head dia. x 1/2″ head length, fine blue #KB32719

Share this with your friends

Singular name: Bits Category: Typhoon, Typhoon 3/32" Shank

Typhoon 3/32 Shank Bud KB32415

Typhoon Bud 5/16″ Head diameter and 3/4″ Head Length fine blue #KB32415

Share this with your friends

Singular name: Bits Category: Typhoon, Typhoon 3/32" Shank

Typhoon 1/8″ Shank Taper KV18114

Typhoon Carbide Taper Coarse 5/16″ head diameter x 1/2″ head length (COARSE IS RED) KB18114

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Taper KB18115

Typhoon Carbide Taper Fine 5/16″ head diameter x 1/2″ head length (BLUE IS FINE) KB18115

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Sphere KB18339

Typhoon Carbide Sphere Fine 7/16″ head diameter x 7/16″ head length (BLUE IS FINE) KB18339

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Sphere KB18338

Typhoon Carbide Sphere Coarse 7/16″ head diameter x 7/16″ head length (COARSE IS RED) KB18338

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Sphere KB18315

Typhoon Carbide Sphere Fine 5/16″ head diameter x 5/16″ head length (FINE IS BLUE) KB18315

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Sphere KB18314

Typhoon Carbide Sphere Coarse 5/16″ head diameter x 5/16″ head length (COARSE IS RED) KB18314

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Rotor Saw KB18835

Typhoon Carbide Rotor Saw Coarse 11/16″ head diameter x 3/16″ head length Fine Blue KB18835

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Rotor Saw KB18834

Typhoon Carbide Rotor Saw Coarse 11/16″ head diameter x 3/16″ head length (RED IS COARSE) KB18834

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Long Taper KB18119

Typhoon Carbide Long Taper Fine 3/16″ head diameter x 3/4″ head length (FINE IS BLUE) KB18119

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Long Taper KB18118

Typhoon Carbide Long Taper Coarse 3/16″ head diameter x 3/4″ head length (COARSE IS RED) KB18118

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Flame KB18915

Typhoon Carbide Flame Fine 7/16″ head diameter x 5/8″ head length (FINE IS BLUE) KB18915

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Flame KB18914

Typhoon Carbide Flame Coarse 7/16″ head diameter x 5/8″ head length (COARSE IS RED) KB18914

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Dove Tail KB18639

Typhoon Carbide Dove Tail Fine 7/16″ head diameter x 1/2″ head length (FINE IS BLUE) KB18639

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Dove Tail KB18638

Typhoon Carbide Dove Tail Coarse 7/16″ head diameter x 1/2″ head length (COARSE IS RED) KB18638

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Cylinder Smooth End KB18525

Typhoon Carbide Cylinder Fine 5/16″ head diameter x 1/2″ head length (FINE IS BLUE) KB18525

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Cylinder Smooth End KB18524

Typhoon Carbide Cylinder Coarse 5/16″ head diameter x 1/2″ head length (COARSE IS RED) Smooth End KB18524

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Cylinder KB18515

Typhoon Carbide Cylinder Fine 5/16″ head diameter x 1/2″ head length (FINE IS BLUE) KB18515

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Cylinder KB18514

Typhoon Carbide Cylinder Coarse 5/16″ head diameter x 1/2″ head length (COARSE IS RED) KB18514

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Bud KB18415

Typhoon Carbide Bud Fine 5/16″ head diameter x 3/4″ head length (FINE IS BLUE) KB18415

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Bud KB18414

Typhoon Carbide Bud Course 5/16″ head diameter x 3/4″ head length (COARSE IS RED) KB18414

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Ball Nose KB18719

Typhoon Carbide Ball Nose Fine 3/16″ head diameter x 7/8″ head length (FINE IS BLUE) KB18719

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Ball Nose KB18718

Typhoon Carbide Ball Nose Coarse 3/16″ head diameter x 7/8″ head length (COARSE IS RED) KB18718

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Ball Nose KB18715

Typhoon Carbide Ball Nose Fine 3/16″ head diameter x 7/8″ head length (FINE IS BLUE) KB18715

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/8″ Shank Ball Nose KB18714

Typhoon Carbide Ball Nose Coarse 5/16″ head diameter x 1/2″ head length (COARSE IS RED) KB18714

Share this with your friends

Singular name: Bits Category: Typhoon 1/8" Shank

Typhoon 1/4″ Shank Taper KB14179

Typhoon carbide burs in 15º taper. 13/16″ head dia. x 1-3/8″ head length, fine grits, 1/4″ shank Blue #KB14179

Share this with your friends

Singular name: Bits Category: Typhoon 1/4" Shank

Typhoon 1/4″ shank Taper KB14178

Typhoon carbide burs in 15º taper. 13/16″ head dia. x 1-3/8″ head length, coarse grits, 1/4″ shank Red #KB14178

Share this with your friends

Singular name: Bits Category: Typhoon 1/4" Shank

Typhoon 1/4″ shank Taper KB14158

Typhoon carbide burs in 15º taper. 9/16″ head dia. x 1″ head length, coarse grits, 1/4″ shank Red #KB14158

Share this with your friends

Singular name: Bits Category: Typhoon 1/4" Shank

Typhoon 1/4″ Shank Taper KB14115

Typhoon carbide burs in 15º taper. 5/16″ head dia. x 1-1/2″ head length, fine grits, 1/4″ shank Blue #KB14115

Share this with your friends

Singular name: Bits Category: Typhoon 1/4" Shank

Typhoon 1/4″ Shank Taper KB14114

Typhoon carbide burs in 15º taper. 5/16″ head dia. x 1-1/2″ head length, coarse grits, 1/4″ shank Red #KB14114

Share this with your friends

Singular name: Bits Category: Typhoon 1/4" Shank

Typhoon 1/4″ Shank Taper 9/16″ head KB14159

Typhoon carbide burs in 15º taper. 9/16″ head dia. x 1″ head length, fine grits, 1/4″ shank Blue #KB14159

Share this with your friends

Singular name: Bits Category: Typhoon 1/4" Shank

Typhoon 1/4″ Shank Sphere KB14395

Typhoon carbide sphere. 7/8″ head diameter, coarse grit Red # KB14395

Share this with your friends

Singular name: Bits Category: Typhoon 1/4" Shank

Typhoon 1/4″ Shank Sphere KB14313

Typhoon carbide spheres. 9/16″ head diameter, fine grits, 1/4″ shank. blue #KB14313

Share this with your friends

Singular name: Bits Category: Typhoon 1/4" Shank

Typhoon 1/4″ shank Sphere KB14312

Typhoon carbide spheres. 9/16″ head diameter, coarse grits, 1/4″ shank. Red #KB14312

Share this with your friends

Singular name: Bits Category: Typhoon 1/4" Shank

Typhoon 1/4″ Shank Smooth End Taper KB14198

Typhoon carbide bur in 5º taper with smooth end for making stop or right angle cuts. Coarse grit, 13/16″ head dia. x 1-1/4″ head length, 1/4″ shank. RED #KB14198

Share this with your friends

Singular name: Bits Category: Typhoon 1/4" Shank

Typhoon 1/4″ shank Smooth end Cylinder KB14533

Typhoon carbide cylinder with smooth end (no points). Use for making stop or right angle cuts. Fine grit, 9/16″ head dia. 1 1/4 “head length, 1/4” shank. Blue #KB14533

Share this with your friends

Singular name: Bits Category: Typhoon 1/4" Shank

Typhoon 1/4″ shank Smooth End Cylinder KB14522

Typhoon carbide cylinder with smooth end (no points). Use for making stop or right angle cuts. Coarse grit, 9/16″ head dia. x 3/4″ head length, 1/4″ shank. Red #KB14522

Share this with your friends

Singular name: Bits Category: Typhoon 1/4" Shank