This machine will sharpen your Chisels and Knives better and faster You will have a sharper edge, free of burrs. Heavy Duty construction of steel and aluminium (no plastic). 1/4 H.P., 1/2″ shaft motor, switch and cable included. Includes: 1” x 42” 120 grit blue Zirconia belt 1” x 42” 1200 grit 3M Trizact belt 1” x 42” 700 grit Trizact belt 1” x 42” Heavy Duty Leather Belt for final honing
| |||||||
Can buy just the motor or machine if you like |
Sharpening SS09 Sanding Drum information sheet
Includes
2″ X 1 1/2″ Sanding Drum with 1/4″ Shank
one each 120, 320 & 500 grit sanding Sleeves
Leather Honing Sleeve and Abrasive Stick
It is primarily chromium oxide admixed with other fine abrasives to give the best combination of cutting speed and fine finish. The bonding is formulated for ease of charging. It will adhere equally well to felt, leather, or wood.
Cuts quickly but leaves a mirror finish with a light wax film. Ideal for carving tools and firmer gouges, it can be used for final honing of almost any tool. Also used with a felt wheel or leather belt for power honing or with a leather strop for hand honing. Available in 1 lb bar $19.95, 8 oz half bar $10.00.
The Flexcut SlipStrop is an economical way for maintaining our tools razor edge. It has been specially molded to allow for polishing and deburring the hard-to-reach areas on the inside of V-tools and gouges as well as the outside edge bevel. Includes a small bar of Flexcut Gold polishing compound and detailed instructions.
The Leather Powerstrop kit provides a great way to maintain your Flexcut edges like new or remove any wire edge left from a sharpening stone when reshaping is required. Fits into any standard power drill. Includes only the flat leather wheel and polishing compound. Rated for 600-800 RPM.
Our Flexcut Knife Strop has an 8” x 2” leather stropping surface, designed exclusively for stropping and keeping your knife blades razor sharp. Simply strop your knife blade away from the cutting edge on both sides to maintain your factory edge. Clamp or handheld ability; Flat and sturdy construction. Includes a 1 ounce bar of Flexcut Gold Polishing Compound designed to adhere to the strop by rubbing the bar on the leather surface of the strop
The Leather Powerstrop kit provides a great way to maintain your Flexcut edges like new or remove any wire edge left from a sharpening stone when reshaping is required. Fits into any standard power drill. Includes only the flat leather wheel and polishing compound. Rated for 600-800 RPM.
The Deluxe Powerstrop is identical to the standard PWS10 and contains an additional V-shaped leather wheel for buffing inside of V-tools and gouges.
The white aluminum oxide is the standard for grinding cutting tools such as chisels and plane irons. Unlike the gray wheels that come with most bench grinders, these wheels help keep your tool much cooler so your tool doesn’t overheat and weaken your cutting edge. 6″ x 3/4 150 grit very fine, 1″ arbor with bushings – 7/8, 3/4, 5/8, 1/2 arbors. Norton grinding wheels fit all popular bench and pedestal grinders. They are ideal for grinding, shaping and sharpening high speed or hardened steel tools. These wheels can be used dry, with water, or with oil.
It is primarily chromium oxide admixed with other fine abrasives to give the best combination of cutting speed and fine finish. The bonding is formulated for ease of charging. It will adhere equally well to felt, leather, or wood.
Cuts quickly but leaves a mirror finish with a light wax film. Ideal for carving tools and firmer gouges, it can be used for final honing of almost any tool. Also used with a felt wheel or leather belt for power honing or with a leather strop for hand honing
