The Flexcut SlipStrop is an economical way for maintaining our tools razor edge. It has been specially molded to allow for polishing and deburring the hard-to-reach areas on the inside of V-tools and gouges as well as the outside edge bevel. Includes a small bar of Flexcut Gold polishing compound and detailed instructions.
Our Carving Scrapers can remove any uneven surface or finish from your work without the use of sandpaper that costs money and creates airborne dust. Interchangeable Power Handle included. SK121
Removes:
- Roughness on hand or power carving
- Ripple marks from moulding operations
- Excess glue in hard-to-reach areas
- Unwanted paint or other finishes
This molded leather sheath will fit any standard knife profile (does not fit mini-knives, KN33 Hooked Push Knife, or scorps). A blade stop is fixed at the bottom of the sheath to keep the point from cutting through. The metal belt clip attaches easily to any belt style. kn02
Our Flexcut Knife Strop has an 8” x 2” leather stropping surface, designed exclusively for stropping and keeping your knife blades razor sharp. Simply strop your knife blade away from the cutting edge on both sides to maintain your factory edge. Clamp or handheld ability; Flat and sturdy construction. Includes a 1 ounce bar of Flexcut Gold Polishing Compound designed to adhere to the strop by rubbing the bar on the leather surface of the strop
3-Knife Starter Set
We’ve packaged some of our most popular knives in one, 3-Knife Starter Set. These knives are made with the same edge-holding steel as our gouges and chisels. The comfortable curved ergonomic handle allows for long periods of carving without hand fatigue.
JNK91 Right-handed Carving Jack
The Carvin’ Jack is a complete carving kit in your pocket. At 3.5 ounces and a closed length of 4-1/4″, it features 6 locking edge tools. Each kit also includes a leather belt mounted sheath, a custom fit SlipStrop and Gold Polishing compound.
JKNL91 Left-handed Carving Jack
The Carvin’ Jack is a complete carving kit in your pocket. At 3.5 ounces and a closed length of 4-1/4″, it features 6 locking edge tools. Each kit also includes a leather belt mounted sheath, a custom fit SlipStrop and Gold Polishing compound.
The Tri-Jack Pro™ is the newest multi-tool in Flexcut’s jackknife series. As its name suggests, the Tri-Jack has three blades that lock in place – a roughing knife, detail knife, and mini-cutting knife. The well designed handle minimizes hand fatigue and is made of aerospace-grade aluminum with a quarter-cut cherry inlay
Designed for extreme detail used in netsuke or caricature carving. These tools have their edges forged down even thinner than our other palm tools. Cutting with these fine edges allows the carver to work extremely close to adjacent detail without crushing wood fibers that can lead to “chipping out.” The 45 degree V-tool offers a deep, dark, visible cut while keeping an ultra narrow width.
As the name implies, this set was made for miniature carving. Model-makers, as well as those who enjoy carving fine detail, find these tools quite handy. Ranging in size from 1/8-inch down to 1/16-inch, these tools make others seem like crayons when you really need a sharp pencil.
This very popular set is great for those just getting started or those with more experience who like to carve smaller sized projects. The handle fits comfortably in the palm, allowing for good control close to your work. The five profiles can perform a variety of tasks and carve moderate detail.
Palm Tools included: FR308 #2 x 5/16″, FR305 #3 x 3/8″, FR306 #6 x 5/16″, FR309 #11 x 1/8″, FR307 70 deg. x 1/4″.
5″ Flexible Draw Knife
Our flexible draw knife has 5 inches of workable edge, designed to flex around contours where large amounts of stock need to be removed quickly. The tool can be flexed to accommodate concave or convex surfaces. Cuts can be made that conform more closely to the finished shape, taking less time to sand or scrape. The curved edge gives a skew-like cutting action for a low resistance cut. This tool works great for carving chair legs, hollowing chair bottoms or quickly roughing-out decoys. KN16
Our Deluxe Starter Set has everything a new wood carver needs. It includes 16 interchangeable blades, cutting knife, quick connect handle and a mallet power handle. There’s also a SlipStrop, gold compound and an owner’s manual showing how to care for your tools. Plus you’ll find a free step-by-step DVD for a great first project. This is our most complete carving set all in one box. It has everything you need, whether it be for mallet, palm or knife carving. There is even a place to store an optional Universal Adapter for using these tools with your reciprocating power carver.
The 16 gouge profiles featured in this kit are not included in any other SK carving set.