This ingenious tool removes carbon buildup from most sharp Razertip® tips quickly and easily. Prolongs tip life (compared to using abrasives). One hand operation; works without turning off power. New design includes a flip-away blade cover for safety.
Note: We suggest that you never use abrasives to clean burner tips. Abrasives wear your tip out and will cause it to carbon up quicker than if you scraped it. We realize that some manufacturers advocate abrasives to clean tips. Either they don’t know about scraping or they have other motives (i.e. selling you more tips). Scraping works best!
SS-D10HD Woodburner
The SS-D10is Razertip’s workhorse, with many features not found on any other burner. Dual handpiece capability allows you to have 2 pens plugged in at the same time and change between them at the flick of a switch. This is particularly useful if your work calls for frequent handpiece changes as it saves time as well as wear on the connectors. The SS-D10’s extra low-end temperature adjustment allows you to turn the heat down further if the “1” setting is still too hot. If you are sculpting wax or detailing plastics, you’ll love the extra range available on the low end of the SS-D10. The only difference is the HD has a heavy Duty pen and cord HD1L or any pen of equal value.
Unconditional warranty covers everything (and we mean everything!) for 3 years on the power supply and one year on all handpieces including fixed tips. Even if you drop your pen and break the tip – it is covered!
SS-D10 Woodburner
The SS-D10is Razertip’s workhorse, with many features not found on any other burner. Dual handpiece capability allows you to have 2 pens plugged in at the same time and change between them at the flick of a switch. This is particularly useful if your work calls for frequent handpiece changes as it saves time as well as wear on the connectors. The SS-D10’s extra low-end temperature adjustment allows you to turn the heat down further if the “1” setting is still too hot. If you are sculpting wax or detailing plastics, you’ll love the extra range available on the low end of the SS-D10.
Unconditional warranty covers everything (and we mean everything!) for 3 years on the power supply and one year on all handpieces including fixed tips. Even if you drop your pen and break the tip – it is covered!
SKHD Woodburner
Don’t let the SK’ssmall size fool you. Packed with the same power and CSA NRTL/C certified circuitry as the SS-D10, the SK is great as a starter unit or as a second burner for the serious artist. So what’s the difference from the SS-D10? The SK will accept only one handpiece at a time, making it necessary to unplug and plug in handpieces when changing over, and it’s lacking the extra-low-end temperature adjustment. Other than that, it’s essentially the same unit as the SS-D10. The only difference with the SKHD is a heavier cord and Pen. Comes with a HD1L pen or any of equal value.
Unconditional warranty covers everything (and we mean everything!) for 3 years on the power supply and one year on all handpieces including fixed tips. Even if you drop your pen and break the tip – it is covered!
Sk Woodburner
Don’t let the SK’ssmall size fool you. Packed with the same power and CSA NRTL/C certified circuitry as the SS-D10, the SK is great as a starter unit or as a second burner for the serious artist. So what’s the difference from the SS-D10? The SK will accept only one handpiece at a time, making it necessary to unplug and plug in handpieces when changing over, and it’s lacking the extra-low-end temperature adjustment. Other than that, it’s essentially the same unit as the SS-D10. Comes with F1L Pen or any of equal value.
Unconditional warranty covers everything (and we mean everything!) for 3 years on the power supply and one year on all handpieces including fixed tips. Even if you drop your pen and break the tip – it is covered!
The Razertip Razaire Z530 dust collector is a quiet, ultra-efficient, portable, modular dust management system. It comes with a 2 inch standard filter, filter frame and 8 inch hood. Collects dust at the source (rotary carving tools, belt sanders, etc.) to overall shop air filtration. (Suggested Retail Price $399.00)
The supplied standard 2″ filter is easily removed for cleaning (filter is cleaned by tapping it into a plastic bag or a garbage can). It can be cleaned many times before replacement is necessary. The Flameproof ABS cabinet has a built-in lamp holder that accepts a standard swing-arm lamp (not included), giving you excellent light where you need it most – right at the intake. Also supplied with an 8 inch acrylic hood that breaks down into 3 flat panels for portability.
Several accessories can be added to increase the versatility of this system – everything from adding higher efficiency filters or extra filter stages (for increased efficiency) to a 4″ hose adapter, a lap-top tray, a motor tool hanger, and a deflector to direct the air towards the back.
120 Volts AC, 60Hz. Safety certified for Canada and the United States. 
This very comfortable tray was designed so that you can carve right in your lap (requires use of the 4″ hose adapter and a length of 4″ hose). But it is much more than just a lap tray. Stand it on edge and it excels at picking up dust from small stationary belt sanders and small grinders. The built-in lips are not only comfortable to rest your arms on, they can also be used to fashion the lap tray into a drawer that conveniently stores away under your desk or bench. Approximately 13″x17″x2″ deep.
Exhaust air discharges from the side of the Razaire 530. This adapter slips down over the exhaust, re-directing the air towards the back of the unit. Useful in classes, but itʼs also great to re-direct air in many other situations e.g. when using your Razaire 530 beside a tabletop sander or scrollsaw. It is also recommended that you use this deflector when using a Razaire 530 without the front hood.
Razertip heavy-duty #4 cord, with one RCA male and two “U” connectors. Allows the use of Razertip pens on power supplies using a screw terminal block. Example: some Colwood burners.
1M (39”) long.
Standard “FL” cords (black plugs) use an 18-gauge cord for maximum flexibility. Heavy-Duty “HD” cords (red plugs) use a 16-gauge cord for maximum current flow, but it’s not quite as flexible. For fastest tip heat recovery the HD cord is recommended. Any of our pens work on either cord, but HD and Feather Former pens/tips work best with HD cords.
Razertip super flex #4 cord, with one RCA male and two “U” connectors. Allows the use of Razertip pens on power supplies using a screw terminal block. Example: some Colwood burners.
1M (39”) long.
Standard “FL” cords (black plugs) use an 18-gauge cord for maximum flexibility. Heavy-Duty “HD” cords (red plugs) use a 16-gauge cord for maximum current flow, but it’s not quite as flexible. For fastest tip heat recovery the HD cord is recommended. Any of our pens work on either cord, but HD and Feather Former pens/tips work best with HD cords.
Razertip heavy-duty #3 cord, with one RCA male and one 1/4” phone plug. Allows the use of Razertip pens on power supplies with a 1/4” phone jack (Detail Master, etc.).
1M (39”) long.
Standard “FL” cords (black plugs) use an 18-gauge cord for maximum flexibility. Heavy-Duty “HD” cords (red plugs) use a 16-gauge cord for maximum current flow, but it’s not quite as flexible. For fastest tip heat recovery the HD cord is recommended. Any of our pens work on either cord, but HD and Feather Former pens/tips work best with HD cords.
| Razertip heavy duty #2 cord, with one male and one female RCA conector. Allows you to use other pens (Colwood, Nibs, Optima) on a Razertip power supply. . 1M (39”) long. Standard “FL” cords (black plugs) use an 18-gauge cord for maximum flexibility. Heavy-Duty “HD” cords (red plugs) use a 16-gauge cord for maximum current flow, but it’s not quite as flexible. For fastest tip heat recovery the HD cord is recommended. Any of our pens work on either cord, but HD and Feather Former pens/tips work best with HD cords. |
Razertip heavy-duty #1 cord for Razertip burners and pens, one male connector on each end.. Also allows use of Razertip pens on other power supplies using an RCA connector. Example: Optima, Nibs.
1M (39”) long.
Standard “FL” cords (black plugs) use an 18-gauge cord for maximum flexibility. Heavy-Duty “HD” cords (red plugs) use a 16-gauge cord for maximum current flow, but it’s not quite as flexible. For fastest tip heat recovery the HD cord is recommended. Any of our pens work on either cord, but HD and Feather Former pens/tips work best with HD cords.
Razertip standard super flex #1 cord supplied with Razertip burners. Also allows use of Razertip pens on most other burners that use an RCA connector, example: Optima, Nibs.
1M (39”) long.
Standard “FL” cords (black plugs) use an 18-gauge cord for maximum flexibility. Heavy-Duty “HD” cords (red plugs) use a 16-gauge cord for maximum current flow, but it’s not quite as flexible. For fastest tip heat recovery the HD cord is recommended. Any of our pens work on either cord, but HD and Feather Former pens/tips work best with HD cords.
Activated Charcoal Standard 30% Efficient (gray) filter. Most often used as a second stage to reduce many odours like burning wood, antler and eggshell. Recommended as a second stage as it will require frequent replacement if used alone. Note: This filter does not eliminate odours. It has proven effective in reducing airborne odours and works best at low fan speed settings
