Each set $79.95 OR SOLD INDIVIDUALLY $21.95 EACH
Set #1
RG316 (#1 Single Bevel 3/8″ (9mm)
RG351 (Spoon 1/2″ 12mm)
RG401 (#5 Sweep 9/16″ 14mm)
RG403 (Parting Tools 3/8″ 9mm 70 degree)
Set #2
RG316 (#1 Single Bevel 3/8″ (9mm)
RG201 (#5 Sweeps 7/8″ 22mm)
RG402 (#8 Sweeps 3/8″ 10mm )
RG309 (#11 Sweeps 1/8″ 3mm)
SK109 $29.95
This adaptor will allow you to use our SK range of carving tools in your Reciprocating Power Carver.
Fits: Wecheer Flexible Shaft Carver, Proxxon Detail Carver & Automach HCT-30. Accepts all Flexcut SK range of carving tools.
ONE USED SK105 $24.95
Allows any palm tool without a handle (SK Range) to be used with a Bosch or Skil power carver
Flexcut’s Spoon Carvin’ Jack makes it easy and convenient to handcraft spoons from every kind of wood stock. It has both a shallow and deep hook knife, designed to form the hollows of spoons and bowls. It also features a straight blade for shaping and carving the fine details into the design. Like all of the knives in our Carvin’ Jack series, our Spoon Carvin’ Jack fits neatly in your pocket, so you can carve wherever you go. The handle is made of rugged aerospace aluminum with an ergonomic design that contours to fit the palm of your hand. There is also a deep crosshatching on the handle to keep the knife from slipping while carving.
Deep Hook Knife Radius = .75”
Shallow Hook Knife Radius = 5”
The Flexcut SlipStrop is an economical way for maintaining our tools razor edge. It has been specially molded to allow for polishing and deburring the hard-to-reach areas on the inside of V-tools and gouges as well as the outside edge bevel. Includes a small bar of Flexcut Gold polishing compound and detailed instructions.
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities.
Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself (you can buy these in Left hand or right hand ) $38.95 EACH
KN21 KN22 KN23 KN24 four profiles
Parting Tools
30°
FR413 5/32″ (4mm) $31.25
45°
FR803 1mm (micro) $31.25
FR317 5/32″ (4mm) $28.75
FR412 1/4″ (6mm) $31.25
60° Soft V
FR760 1/2″ (12mm) $31.25
70°
FR603 1/8″ (3mm) $28.75
FR307 1/4″ (6mm) $28.75
FR970 5/8″ $32.50
90°
FR706 5/8′ (15mm) $31.25
110°
FR910 1″ $32.50
Macaroni
FR735 7/16″ (11mm) $31.25
This molded leather sheath will fit any standard knife profile (does not fit mini-knives, KN33 Hooked Push Knife, or scorps). A blade stop is fixed at the bottom of the sheath to keep the point from cutting through. The metal belt clip attaches easily to any belt style. kn02
Our Flexcut Knife Strop has an 8” x 2” leather stropping surface, designed exclusively for stropping and keeping your knife blades razor sharp. Simply strop your knife blade away from the cutting edge on both sides to maintain your factory edge. Clamp or handheld ability; Flat and sturdy construction. Includes a 1 ounce bar of Flexcut Gold Polishing Compound designed to adhere to the strop by rubbing the bar on the leather surface of the strop
3-Knife Starter Set
We’ve packaged some of our most popular knives in one, 3-Knife Starter Set. These knives are made with the same edge-holding steel as our gouges and chisels. The comfortable curved ergonomic handle allows for long periods of carving without hand fatigue.
Designed for extreme detail used in netsuke or caricature carving. These tools have their edges forged down even thinner than our other palm tools. Cutting with these fine edges allows the carver to work extremely close to adjacent detail without crushing wood fibers that can lead to “chipping out.” The 45 degree V-tool offers a deep, dark, visible cut while keeping an ultra narrow width.
As the name implies, this set was made for miniature carving. Model-makers, as well as those who enjoy carving fine detail, find these tools quite handy. Ranging in size from 1/8-inch down to 1/16-inch, these tools make others seem like crayons when you really need a sharp pencil.
This very popular set is great for those just getting started or those with more experience who like to carve smaller sized projects. The handle fits comfortably in the palm, allowing for good control close to your work. The five profiles can perform a variety of tasks and carve moderate detail.
Palm Tools included: FR308 #2 x 5/16″, FR305 #3 x 3/8″, FR306 #6 x 5/16″, FR309 #11 x 1/8″, FR307 70 deg. x 1/4″.
These are 2 sets I made up for beginner Carvers
Both come with 11 pocket tool Roll, Quick connect handle (for $8.00 more you can add to basswood Leaf blanks and a DVD with Step-by-Step Instructions)
5 piece chisel set (Comes with FR406, FR603,FR409, FR412, FR306) $87.00
11 piece chisel set (Comes with FR705, FR403, FR701, FR706, FR407, FR451, FR305, FR702, FR703, FR307, FR700) $140.00
Our Micro Tools can handle the extra-fine details often encountered in woodcarving. This set features four micro chisels. Micro Tools included: MT43 1/16″ (1.5mm), MT44 1/8″ (3mm), MT45 3/16″ (5mm), MT46 1/4″ (6mm).
Perfect for:
•Miniature and fine detail work
•Cleaning up ridges created by gouge cuts
•Cleaning up tight corners
•Accessing tight spaces
•Carving fine details such as mouths and eyes, plus adding texture such as hair, fur and feathers
Our Deluxe Starter Set has everything a new wood carver needs. It includes 16 interchangeable blades, cutting knife, quick connect handle and a mallet power handle. There’s also a SlipStrop, gold compound and an owner’s manual showing how to care for your tools. Plus you’ll find a free step-by-step DVD for a great first project. This is our most complete carving set all in one box. It has everything you need, whether it be for mallet, palm or knife carving. There is even a place to store an optional Universal Adapter for using these tools with your reciprocating power carver.
The 16 gouge profiles featured in this kit are not included in any other SK carving set.
Our 11-Piece Craft Carver Set contains ten carving blades, an interchangeable ABS handle, leaf project carving blank, and an 11-pocket tool roll. Rolled up, this set is extremely portable. An owner’s manual is also included with step-by-step instructions for completing the project. (This is a different set from the one listed on Flexcut site)
Profiles included: Sk305, SK307, SK406, SK409, SK412, SK451,SK700, SK701,SK703, SK706
The Beginner 2-Blade Craft Carver Set has everything needed to tackle a first time project. It comes with two carving blades – a V-Tool and a gouge – plus an interchangeable ABS handle. A basswood blank for the leaf carving project and a second blank for practicing cuts are included. There is also a project DVD with step-by-step visual instructions as well as a 24-page owner’s manual that outlines the leaf project and provides maintenance and safety tips for beginners.
This is an affordable set for beginners and those who want to give woodcarving a try.
Profiles included: SK306 #6 x 5/16″, SK307 70 deg. x 1/4″.